Auditori
Get started

MEM12019 — Measure components using coordinate measuring machines

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM12019 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM12019 must cover

36 assessable components: 4 elements (15 performance criteria), 6 performance evidence and 11 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications, sketches, job sheets or work instructions

2 Load components

  • 2.1Undertake pre-start checks in accordance with SOPs
  • 2.2Observe correct safety procedures and check safety equipment for correct operation
  • 2.3Select correct fixture/clamping device
  • 2.4Load and clamp component and fixtures in accordance with SOPs

3 Set probes

  • 3.1Check probe configuration in accordance with specifications
  • 3.2Take pre-measurement manual hits to determine probe alignment in accordance with SOPs

4 Measure components

  • 4.1Select, run and verify part program, as required
  • 4.2Measure components utilising appropriate measuring devices
  • 4.3Interpret results and identify and report non-conforming/out-of-tolerance measurements
  • 4.4Shut down part program and remove components
  • 4.5Leave coordinate measuring machine, accessories and surrounds in a clean, safe condition

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications and sketches for selecting appropriate methods for measuring components using coordinate measuring machines (CMM)
  • selecting and loading components and fixtures using appropriate fixture/clamping device
  • setting and manually aligning probes in accordance with specifications
  • selecting and activating part programs, as required, where machine is fitted with microprocessors and measuring components and interpreting results and reporting all anomalies in accordance with SOPs
  • shutting down part program and removing components and cleaning CMMs.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • task-related information on job sheets or equivalent
  • pre-start checks
  • fixtures/clamping devices, methods and their uses
  • storage location and procedures
  • procedures for undertaking pre-measurement manual hits for manual alignment and checking probe configuration
  • procedures for running and verifying part program
  • procedures, methods/techniques for interpreting results and reporting results and recommendations for adjustment
  • effects of contamination
  • procedures for shutting down part program
  • safe removal and handling of components procedures.

Foundation skills

  • reading: This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.
  • writing: This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.
  • oral communication: This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.
  • numeracy: This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM12019

What does an assessment tool for MEM12019 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM12019 needs to address all 36 unit components: 4 elements with 15 performance criteria, 6 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM12019?

Auditori pulls the current release of MEM12019 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM12019 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM12019 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM12019, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM12019 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM12019 free