MEM11024 — Undertake basic rigging

1 Determine job requirements

• 1.1Follow standard operating procedures (SOPs)
• 1.2Comply with work health and safety (WHS) requirements at all times
• 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
• 1.4Identify rigging to be undertaken and assess from supervisor’s instructions and other appropriate sources

2 Assess rigging site

• 2.1Identify equipment and processes in close proximity to rigging site and the need for protection, shielding or closure during rigging with appropriate personnel
• 2.2Identify other potential workplace hazards and appropriate hazard control measures
• 2.3Obtain site information
• 2.4Identify rigging equipment and associated equipment, including safety equipment available on site

3 Plan rigging work

• 3.1Consider all forces and loads associated with erecting and dismantling structures and associated equipment in consultation with appropriate personnel
• 3.2Identify required safety equipment for rigging task
• 3.3Consider procedures for minimising disruption to other site processes
• 3.4Identify appropriate communication methods with appropriate personnel

4 Select and inspect equipment

• 4.1Select rigging equipment and associated equipment and inspect according to SOPs and the appropriate standard
• 4.2Select required safety equipment and inspect according to SOPs
• 4.3Isolate all defective rigging equipment, associated equipment and safety equipment and report and record according to SOPs
• 4.4Select, as applicable, communication equipment and inspect for serviceability

5 Set up rigging task

• 5.1Apply appropriate hazard prevention or control measures to the work area according to SOPs
• 5.2Inspect ground suitability and check, where appropriate
• 5.3Review site information and interpret with appropriate personnel
• 5.4Determine all forces and loads associated with erecting and dismantling structures and associated plant and compare with planned forces and loads in consultation with appropriate personnel
• 5.5Make required adjustments for actual forces and loads to rigging plan, rigging equipment, associated equipment and safety equipment
• 5.6Position rigging equipment and associated plant for work application and stability according to SOPs
• 5.7Apply methods of applying temporary connections using fibre rope according to SOPs and the appropriate standard

6 Erect, move or dismantle structures, plant or equipment

• 6.1Erect structures, plant or equipment, move or dismantle according to SOPs and site information
• 6.2Maintain stability of structures, plant or equipment during erection, movement or dismantling
• 6.3Follow safety procedures where height work is required, including safe and effective use of safety equipment
• 6.4Use appropriate communication methods and communication equipment to coordinate the rigging tasks
• 6.5Use associated plant and equipment according to SOPs and the appropriate standard
• 6.6Connect temporary guys, ties, propping and shoring, including flexible steel wire rope and tubing, as required
• 6.7Follow procedures to minimise disruption to other site operations
• 6.8Inspect the completed task according to the appropriate standard

7 Finalise rigging task

• 7.1Obtain approval for completion of rigging task according to site or enterprise procedures
• 7.2Remove excess materials from the work area, as applicable
• 7.3Inspect rigging equipment, associated equipment, safety equipment and associated plant used during rigging task for damage and defects
• 7.4Isolate all defective rigging equipment, associated equipment, associated plant and safety equipment, report and record according to SOPs
• 7.5Store rigging equipment and associated equipment according to SOPs and the appropriate standard
• 7.6Remove hazard prevention/control measures, as appropriate

What does an assessment tool for MEM11024 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM11024 needs to address all 64 unit components: 7 elements with 37 performance criteria, 16 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM11024?

Auditori pulls the current release of MEM11024 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM11024 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM11024 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM11024, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.