MEM11021Perform advanced operation of load shifting equipment

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM11021 must cover

24 assessable components: 3 elements (12 performance criteria), 6 performance evidence and 6 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify load and check against safe working load and/or relevant specifications or regulations and final position/location
  • 1.5Identify special handling requirements of load, if applicable
  • 1.6Lift and place load in the correct final position/location to achieve specified balance of load

2 Identify and carry loads that require special care

  • 2.1Identify loads requiring special care
  • 2.2Carry loads in accordance with special requirements of product according to procedures and/or regulations

3 Operate forklifts in areas of restricted movement and in special traffic conditions

  • 3.1Collect and manoeuvre load without damage to load or collision with obstacles according to SOPs
  • 3.2Operate forklifts in areas of heavy traffic
  • 3.3Operate forklifts over difficult or uneven surfaces
  • 3.4Operate forklifts in areas shared with the general public, as required

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications, regulations, load charts and communicating with personnel on movement/location when performing advanced operation of load shifting equipment
  • selecting appropriate load shifting device to suit shifting requirements
  • identifying safe working loads as defined in the manufacturers’ specifications for lifting plant or gear
  • identifying/managing loads requiring special care and taking appropriate action
  • operating forklifts in a complex mobile plant environment.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • pre-operational checks
  • licensing requirements and appropriate permits
  • load protection
  • operational environment
  • methods and techniques for loads requiring special care.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM11021

What does an assessment tool for MEM11021 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM11021 needs to address all 24 unit components: 3 elements with 12 performance criteria, 6 performance evidence requirements, 6 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM11021?

Auditori pulls the current release of MEM11021 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM11021 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM11021 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM11021, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM11021 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM11021 free