MEM11009 — Handle/move bulk fluids/gases

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM11009 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM11009 must cover

29 assessable components: 3 elements (14 performance criteria), 7 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, job sheets or work instructions

2 Determine handling methods

2.1Determine type of material from labels, colour codes, signage
2.2Interpret and identify all relevant material properties or clarify with appropriately qualified and authorised authority
2.3Interpret and implement all relevant safety and emergency procedures, as required
2.4Interpret and observe all relevant legislation, regulations and codes of practice
2.5Undertake correct and appropriate handling methods

3 Store bulk fluids/gases

3.1Determine correct storage conditions from instructions/manufacturers’ specifications/directions
3.2Check containers for safe and clean use
3.3Fill/empty containers in accordance with procedures, regulations/legislative requirements
3.4Handle containers and move in accordance with site procedures, regulations/legislative requirements
3.5Label containers in a correct manner and store according to site procedures, regulations/legislative requirements

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting handling and storage instructions, labels, colour codes, signage and terminology, regulations and industry codes of practice and standards
communicating effectively with users of the materials and appropriately qualified and authorised authority
calculating quantities and filling/emptying applicable containers, as required
storing/handling bulk fluids and gases in accordance with storage conditions, including separation and segregation to legislative and dangerous goods code
following safety and emergency procedures as determined by organisational emergency response plan and seeking advice from qualified or authorised personnel, as required
completing all enterprise documentation in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE) for various substances
work health and safety (WHS) and dangerous goods acts and regulations, transport of dangerous goods code, industry codes of practice and standards, and relevant legislative requirements
organisation’s emergency response plan
purpose and application of labels, colour codes and signage as applied to bulk fluids and gases
safety data sheets
procedures for filling and emptying storage containers
packaging requirements for dangerous goods
cleaning requirements for storage containers

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM11009

What does an assessment tool for MEM11009 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM11009 needs to address all 29 unit components: 3 elements with 14 performance criteria, 7 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM11009?

Auditori pulls the current release of MEM11009 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM11009 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM11009 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM11009, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM11009 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM11009 free