MEM10002 — Terminate and connect electrical wiring

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM10002 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM10002 must cover

32 assessable components: 3 elements (12 performance criteria), 6 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Prepare for electrical wiring termination and connection

2.1Undertake all work safely and to workplace procedures and state/territory regulations and legislative requirements
2.2Check materials for correct specifications
2.3Undertake preparation of work or check/inspect for correct location and specifications of cable trays, brackets and trenches

3 Connect electrical wiring

3.1Ensure terminations/connections are made to specifications, manufacturers’ requirements and to safety and state/territory regulations and legislative requirements
3.2Adjust and fix all brackets, clamps and holders to specifications
3.3Ensure all cables, wires, conductors and connections are marked/tagged and labelled to specification
3.4Test terminated cables to ensure continuity and insulation resistance readings comply with requirements
3.5Complete all reports and documentation correctly to required specifications

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, drawings, regulatory and legislative requirements for terminating and connecting electrical wiring
connecting and terminating electrical wiring utilising a range of methods and sealing entry points, where required, and marking/tagging and labelling wiring to specifications
using test equipment to locate various faults
inspecting and testing terminated cables to ensure they comply with continuity and insulation resistance and are safely intended for use
completing all reports and documentation in accordance with SOPs.

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
statutory and regulatory requirements associated with the termination and connection of electrical wiring including AS/NZS 3000:2000, Electrical Installations (known as the Australian/New Zealand Wiring Rules), other Australian/International Standards and codes of practice
different types of electrical cables and cords and their applications
structural components of cables and their purpose (conductor material, stranding, insulation type, voltage rating, screening, sheathing, armour and serving)
identifying the Australian and international colour standards for cables and cords
factors affecting cable current-carrying capacity including current requirements for the circuit, cable installation method to be used and environmental conditions in the vicinity of cable installation
wiring support and/or protection requirements and specifications
relevant manufacturer requirements
specifications and methods for terminating different materials
wiring support techniques and alternatives
marking, tagging and labelling requirements for cables, wires, conductors and connections
test requirements to ensure compliant continuity and insulation resistance
data to be recorded/reported and the frequency of recording/reporting
requirements for approval to work.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM10002

What does an assessment tool for MEM10002 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM10002 needs to address all 32 unit components: 3 elements with 12 performance criteria, 6 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM10002?

Auditori pulls the current release of MEM10002 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM10002 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM10002 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM10002, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM10002 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM10002 free