MEM09205 — Produce electrical schematic drawings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM09205 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM09205 must cover

47 assessable components: 5 elements (20 performance criteria), 9 performance evidence and 18 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Identify job requirements from available information and identify and address further information needs
1.4Determine purpose, scope and information requirements for drawing
1.5Identify and prepare equipment required to complete work

2 Identify system requirements

2.1Identify and apply codes, standards and symbols used for electrical diagrams and drawings
2.2Identify function and purpose of circuit and its components and assemblies
2.3Identify environmental implications of inefficient systems and strategies for minimising impact

3 Prepare electrical drawings and diagrams

3.1Lay out drawing in accordance with the sketches and specifications
3.2Prepare an electrical block diagram in accordance with Australian Standards
3.3Draw cable run and multi-storey riser diagrams from schedules
3.4Produce switchboard layout drawings
3.5Prepare single line and interconnecting electrical diagrams in accordance with Australian Standards
3.6Prepare wiring and circuit diagrams in accordance with Australian Standards

4 Prepare materials list

4.1Select components and materials from supplier catalogues using predetermined specifications
4.2Produce a parts list in accordance with SOPs
4.3Store drawings and materials list in accordance with SOPs

5 Consult with other disciplines

5.1Verify the parameters of the brief and clarify specifications with appropriate personnel
5.2Identify and consult with support services
5.3Present and explain drawings at appropriate stages of the project

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
determining purpose and scope for drawing requirements relevant to the project utilising all available information
determining the function and purpose of circuit and its discrete components and assemblies and confirming through consultation with appropriate personnel
preparing layout of drawings
producing detailed electrical schematic drawings in accordance with relevant Australian and international standards, including cable run and riser diagrams and switchboards on at least two occasions
drawing electrical circuits and connections between devices, including power and signal connections on at least two occasions
preparing an engineering parts list according to customer requirements
verifying parameters of the design brief with appropriate personnel
consulting with appropriate support services and presenting and explaining drawing

Knowledge evidence

safe work practices and procedures
different approaches to drawing
copyright and intellectual property issues and legislation in relation to drawing
requirements of Australian and international standards, with respect to electrical/electronic schematics/drawings
sources of information
quality assurance procedures
organisational standards for computer-aided drawing (CAD)
order of drawing process
organisational checking procedures for drawings
layout and presentation
standards applicable to the work to be undertaken
process of checking the completed drawing
process of storing paper drawings and electronic drawing files
International System of Units (SI)
terminology associated with the preparation of electrical diagrams and drawings
basic components used in electrical installations
wiring types used in electrical installations
functions of components including resistors and capacitors

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM09205

What does an assessment tool for MEM09205 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM09205 needs to address all 47 unit components: 5 elements with 20 performance criteria, 9 performance evidence requirements, 18 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM09205?

Auditori pulls the current release of MEM09205 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM09205 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM09205 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM09205, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM09205 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM09205 free