MEM09203 — Measure and sketch site information

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM09203 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM09203 must cover

44 assessable components: 7 elements (26 performance criteria), 5 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications

2 Prepare for site visit

2.1Verify and comply with work, legislative and organisational requirements relevant to conducting site visits
2.2Confirm project brief and visit objectives
2.3Arrange site visit in accordance with SOPs
2.4Prepare measuring equipment and materials

3 Assess and record site features

3.1Record details of a visual assessment of physical position, layout, access and location and establish site references
3.2Record visual assessment of site structure and materials
3.3Record visual assessment of services
3.4Record observation of other details that may impact on project
3.5Obtain any relevant site information or documentation

4 Take site measurements

4.1Measure site features required by project brief
4.2Ensure required measurements are obtained and verified with calculations
4.3Access and use work information, technology and resources to complete work
4.4Minimise impact of work on the environment

5 Produce sketch of site

5.1Produce sketch to proportion
5.2Apply correct sketching techniques and line construction to the sketch
5.3Apply all dimensions and notations

6 Apply geometric construction methods

6.1Sketch geometric shapes using correct construction techniques
6.2Obtain tangent points using correct techniques
6.3Apply line work using line types and media in accordance with standard industry drawing practice

7 Document site details

7.1Complete isometric sketches that illustrate site details
7.2Gather and document additional site information to inform further work
7.3Use correct symbols and standard drawing conventions

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
interpreting work brief and conducting site visit in accordance with project requirements
recording details of site features on at least two occasions, including site structure and materials, services and any other relevant site information or documentation
taking accurate site measurements of features and making calculations to ensure all required measurements are accurate on at least two occasions
producing sketch of site to proportion using correct sketching conventions and symbols on at least two occasions

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
where to find relevant legislation
quality assurance procedures
materials and equipment needed to produce sketches
calculations used when measuring and sketching site information
conventional signs and markings for plans and drawings
principles of plane geometry including geometric shapes, plane geometry, geometric construction and line types during construction
standard drawing conventions
drawing techniques
drawing constructions including isometric axes, isometric angles, isometric lines, non-isometric lines and isometric circles
four centre method
ordinate method including sectioning isometric shapes
measurement techniques, equipment and tools

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM09203

What does an assessment tool for MEM09203 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM09203 needs to address all 44 unit components: 7 elements with 26 performance criteria, 5 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM09203?

Auditori pulls the current release of MEM09203 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM09203 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM09203 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM09203, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM09203 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM09203 free