Auditori
Get started

MEM08018 — Electroplate engineering coatings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM08018 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM08018 must cover

38 assessable components: 5 elements (17 performance criteria), 4 performance evidence and 17 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications, job sheets or work instructions

2 Select treatments and processes/ equipment for producing engineering finishes

  • 2.1Select appropriate treatment processes according to base metal type, the surface condition and relevant job specifications
  • 2.2Select operating/process parameters to achieve required coating
  • 2.3Select appropriate equipment, as required

3 Prepare work for engineering finishes

  • 3.1Mask (stop off) products for selective plating
  • 3.2Construct conforming anodes and fit, where applicable
  • 3.3Construct and fit shields and robbers, where applicable
  • 3.4Carry out pre-treatment processes, where necessary

4 Monitor and control operating conditions and processes for engineering coatings

  • 4.1Set operating/process parameters to produce required surface conditions/specifications
  • 4.2Monitor and confirm surface conditions of finished components and identify abnormalities
  • 4.3Take corrective actions to rectify non-conforming conditions

5 Maintain solutions for engineering finishes

  • 5.1Check solution compositions and confirm to specification/operating range
  • 5.2Determine adjustment requirements/additions
  • 5.3Make additions to adjust solution composition to correct operating range as necessary

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • determining the composition of surfaces to be treated and selecting suitable methods and techniques for electroplated coating treatment
  • preparing surfaces to be treated with pre-treatment process using masking and constructing/fitting shields/robbers, where necessary, and fitting anodes
  • electroplating surfaces, monitoring the treatment process and adjusting solutions and operating parameters to meet specifications.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • effects of plating process on different materials
  • conditions affecting engineering finishes
  • base metal types and the surface finish of untreated material
  • mechanical/chemical and specialised electroplating pre-treatment processes
  • process parameters for achieving different coatings
  • characteristics of different surface finishes
  • masking materials and masking techniques
  • safe operation of equipment to produce engineering finishes
  • current distribution principles
  • methods of constructing/fabricating, fitting anodes and current capacity of conforming/auxiliary anodes
  • role, construction, properties, applications, and positioning of shields and robbers
  • finish requirements and permissible tolerances
  • causes of electroplating process abnormalities and their related corrective actions
  • purpose and application of simple tests including pH, titration and density
  • calculations related to additions/adjustments to solution and of product surface area
  • procedures for safe handling of chemicals.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM08018

What does an assessment tool for MEM08018 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM08018 needs to address all 38 unit components: 5 elements with 17 performance criteria, 4 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM08018?

Auditori pulls the current release of MEM08018 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM08018 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM08018 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM08018, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM08018 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM08018 free