MEM08013 — Prepare surfaces by abrasive blasting (advanced)

1 Determine job requirements

• 1.1Follow standard operating procedures (SOPs)
• 1.2Comply with work health and safety (WHS) requirements at all times
• 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
• 1.4Identify job requirements from specifications, job sheets or work instructions

2 Prepare to undertake work

• 2.1Select appropriate abrasive blasting process and equipment to meet job specification
• 2.2Select appropriate abrasive blasting media to meet job specification
• 2.3Prepare worksite for surface cleaning activities

3 Set up equipment

• 3.1Assemble, set up and correctly and safely prepare appropriate equipment and any required consumables in accordance with manufacturers’ specifications and workplace procedures
• 3.2Select correct rust inhibitor to reduce corrosion for use in wet abrasive blast methods, where required
• 3.3Carry out pre-operational checks on equipment, rectify faults or report for further action

4 Inspect surface prior to cleaning

• 4.1Inspect work piece prior to cleaning in accordance with procedures
• 4.2Report identified faults/defects requiring remedial or pre-treatment action, as required

5 Prepare surfaces using abrasive blasting

• 5.1Operate blasting equipment in accordance procedures
• 5.2Undertake emergency shutdown procedures, as required
• 5.3Undertake work to meet environmental requirements
• 5.4Carry out abrasive media disposal in accordance with environmental requirements and procedures
• 5.5Disassemble, clean and inspect blasting equipment in accordance with manufacturers’ specifications
• 5.6Record equipment faults and report in accordance with SOPs

6 Inspect prepared surface

• 6.1Assess surface preparation for cleanliness and conformance with specifications
• 6.2Rectify faults or defects where required and record inspection results and report in accordance with SOPs

What does an assessment tool for MEM08013 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM08013 needs to address all 38 unit components: 6 elements with 20 performance criteria, 8 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM08013?

Auditori pulls the current release of MEM08013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM08013 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM08013 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM08013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.