MEM07029 — Perform routine sharpening and maintenance of production tools and cutters
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM07029 must cover
30 assessable components: 4 elements (12 performance criteria), 5 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, job sheets or work instructions
2 Prepare for tool and cutter grinding
- 2.1Disassemble production tooling, as required to facilitate sharpening in accordance with SOPs
- 2.2Select tool and cutter grinding wheels, balance and dress in accordance with job instructions
- 2.3Mount fixtures or locating tools/cutters to be sharpened in accordance with procedures
3 Set up machine and perform tool and cutter grinding
- 3.1Mount tools and cutters to be sharpened in predetermined fixtures
- 3.2Sharpen tools and cutters in accordance with defined procedures
4 Check tools/cutters for conformance to specification
- 4.1Inspect, check and measure tools/cutters for conformance to specifications
- 4.2Inspect, check and measure assembled tooling for conformance to specifications
- 4.3Reassemble production tooling and install inserts in accordance with job instructions
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and interpreting tool and cutter sharpening and maintenance job instructions
- selecting and mounting appropriate grinding equipment and cutters to perform the sharpening task
- undertaking the sharpening and maintenance of tools and cutters checking that the finished work meets specifications
- reassembling the sharpened/maintained tooling and inspecting for conformance to specifications
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- sequence of tooling sharpening and maintenance operations to be performed
- function of coolant and dust extraction devices
- standard grinding wheel shapes
- range of abrasive materials used in grinding wheels
- grain size of abrasive particles
- grade or strength of bond material
- structure of grain spacing and dressing processes
- function and application of grinding accessories used for routine sharpening of production tools and cutters
- preparation requirements for tool maintenance
- dimensions and tolerances
- geometry and tolerances
- surface finish specifications
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM07029
What does an assessment tool for MEM07029 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07029 needs to address all 30 unit components: 4 elements with 12 performance criteria, 5 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM07029?
Auditori pulls the current release of MEM07029 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07029 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM07029 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07029, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM07029 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM07029 free