MEM07028 — Operate computer controlled machines and processes
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM07028 must cover
29 assessable components: 4 elements (12 performance criteria), 6 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, job sheets or work instructions
2 Conduct pre-start checks
- 2.1Undertake pre-start checks to SOPs
- 2.2Check all safety equipment for correct operation
3 Operate computer controlled machine/process
- 3.1Select installed computer controlled program and verify in accordance with job instructions
- 3.2Operate computer controlled machine to product specifications
- 3.3Identify and report machine malfunctions
- 3.4Check production samples for compliance to specification
4 Monitor machine/process
- 4.1Monitor tool wear and, where appropriate, replace pre-set tools and identify tool offsets in computer controlled program and adjust, or take other corrective action according to procedures
- 4.2Report product deviation from specification in accordance with SOPs
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and interpreting specifications, charts, lists and other applicable reference documents for computer controlled machine and process operations
- safely undertaking pre-start checks of the machine/process
- selecting appropriate program for the specified work and operating the machine, identifying any malfunctions and checking completed work to ensure it meets specifications
- monitoring the machine or process operation, adjusting and rectifying any tooling settings, as required
- reporting malfunctions or out-of-specification operation, where necessary.
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- pre-start checks for machines and process
- safety equipment, features and procedures associated with the machine or process
- procedures for accessing and verifying computer controlled programs installed in the machine controller
- computer controlled machine operating procedures
- typical machine malfunctions and procedures for reporting
- measuring instruments/techniques
- examples of tool wear and the effect on product or part specifications and procedures to be followed once tool wear has been detected
- techniques for replacing pre-set tools
- adjustments to tool offsets and the effect of adjustments on part or product specifications
- procedures for reporting product or part deviations.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM07028
What does an assessment tool for MEM07028 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07028 needs to address all 29 unit components: 4 elements with 12 performance criteria, 6 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM07028?
Auditori pulls the current release of MEM07028 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07028 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM07028 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07028, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM07028 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM07028 free