Auditori
Get started

MEM07016 — Set and edit computer controlled machines and processes

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM07016 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM07016 must cover

39 assessable components: 3 elements (13 performance criteria), 11 performance evidence and 15 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Set work holding fixtures/devices/tools

  • 2.1Select correct ancillary devices and attach to machine
  • 2.2Prepare machine to accept work holding devices
  • 2.3Set work holding fixtures/devices/tools to zero or a datum using appropriate setting devices
  • 2.4Measure tooling offsets and record in machine controller

3 Trial program

  • 3.1Operate machine to produce first-off samples, observing all safety procedures
  • 3.2Check first-off samples for compliance with specifications
  • 3.3Undertake program editing to change speeds, feed and operational sequence requirements to ensure job conforms to specification
  • 3.4Replace tools, adjust tool offsets or take other corrective action using SOPs, where appropriate
  • 3.5Instruct operator, if necessary, ensuring that all safety procedures and devices are in place

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications, charts, lists, drawings and other applicable reference documents for computer controlled machine setting and editing
  • attaching ancillary devices in accordance with procedures
  • selecting appropriate tool and work piece holding fittings and fixtures
  • measuring, entering and verifying tool offsets
  • undertaking numerical operations and calculations in setting and editing machines and processes
  • conducting pre-start checks
  • producing and checking first-off samples for conformance with specifications
  • editing programs to ensure compliance with specifications
  • identifying worn or damaged tooling and taking appropriate corrective action
  • instructing machine operator on the sequence of operations

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • ancillary equipment and their applications
  • procedures for attaching the ancillary devices to the numerically controlled (CN) and computer numerically controlled (CNC) machines
  • work holding devices, their application and procedures for mounting them
  • location of work holding fixtures/devices/tools relative to the machine zero or datum
  • reasons for establishing tool offsets
  • procedures and devices for measuring tool offsets
  • procedures for entering, verifying and adjusting tool offset
  • operating procedures
  • safety features and equipment
  • measuring devices/ techniques for checking the parts or product
  • effects of changes to cutting feeds and speeds and the impact of changes to the sequence of operations on the part or product to be produced
  • procedures for editing programs via the machine controller
  • the sequence of operations of the machine/process
  • examples of, effects and corrective action to be taken for worn or damaged tooling

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM07016

What does an assessment tool for MEM07016 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07016 needs to address all 39 unit components: 3 elements with 13 performance criteria, 11 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM07016?

Auditori pulls the current release of MEM07016 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07016 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM07016 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07016, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM07016 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM07016 free