MEM07003 — Perform routine machine setting
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM07003 must cover
22 assessable components: 2 elements (9 performance criteria), 5 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, job sheets or work instructions
2 Set machine
- 2.1Set up machine in accordance with defined procedures
- 2.2Adjust machine to meet specifications and operational requirements
- 2.3Measure first-off samples for compliance with specifications
- 2.4Identify worn or damaged tooling and change, as required
- 2.5Instruct machine operator, if necessary, on sequencing settings and any required safety procedures
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and interpreting job/operation sheets, specifications and other reference material for routine machine setting
- setting machines using appropriate tools and equipment to meet specifications for the machine operation, including measuring first-off samples for compliance with specifications
- identifying and rectifying worn or damaged tooling
- instructing machine operators on correct use of the machine and safety procedures to be followed.
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- strategies for conveying routine instructions
- sequences of machine setting operations
- techniques, tools and equipment used to measure samples
- characteristics of machines and machine processes
- tools and equipment for routine machine setting
- applicable machine tooling and accessories
- symptoms of tool wear.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM07003
What does an assessment tool for MEM07003 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM07003 needs to address all 22 unit components: 2 elements with 9 performance criteria, 5 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM07003?
Auditori pulls the current release of MEM07003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM07003 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM07003 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM07003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM07003 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM07003 free