MEM05086 — Set and edit computer controlled thermal cutting machines

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM05086 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM05086 must cover

31 assessable components: 3 elements (13 performance criteria), 6 performance evidence and 12 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Set work holding fixtures, devices, tools and gas and nozzle controls

2.1Set up machine according to SOPs
2.2Prepare machine to accept work holding devices
2.3Replace worn or damaged nozzles, regulators and work holding devices/tools or take other corrective action in accordance with SOPs
2.4Set work holding fixtures, devices or tools to zero or a datum using appropriate setting devices
2.5Set gas and nozzle controls according to type and thickness of material to be cut and to minimise distortion

3 Trial and complete program

3.1Trial program observing all safety procedures
3.2Check sample cut for compliance with specifications
3.3Edit program and complete setting process to ensure job conforms to specification
3.4Save edited program and complete any required records in accordance with SOPs

Performance evidence

follow work instructions, standard operating procedures (SOPs) and safe work practices
identify and interpret job specifications, drawings, and other applicable work instructions for information relevant to set and edit computer controlled thermal cutting machines
prepare computer controlled thermal cutting machine for work according to the thickness of material and minimisation of distortion on at least two occasions
replace worn or damaged nozzles, regulators, fixtures, devices and tools
trial programs by checking sample cut for compliance and undertaking program editing to ensure job conforms with specifications on at least two occasions
Note: Where a volume and/or frequency is not specified, demonstration must be provided at least once.

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
machine set up procedures
work holding devices, their application and procedures for mounting them
location of work holding fixtures, devices and tools relative to the machine zero or datum
computer controlled thermal cutting machine operating procedures
computer controlled thermal cutting machine safety features and equipment
measuring devices and/or techniques for checking the parts or product
effects of changes to gas mixtures and nozzle or work piece speed
impact of changes to the sequence of operations on the part or product to be produced
procedures for editing programs via the machine controller
sequence of operations of the machine and/or process
corrective action to be taken for worn or damaged tooling.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM05086

What does an assessment tool for MEM05086 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM05086 needs to address all 31 unit components: 3 elements with 13 performance criteria, 6 performance evidence requirements, 12 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM05086?

Auditori pulls the current release of MEM05086 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM05086 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM05086 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM05086, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM05086 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM05086 free