MEM05079 — Perform welds to code standards using flux core arc welding process

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM05079 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM05079 must cover

31 assessable components: 3 elements (14 performance criteria), 8 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from weld procedure specifications (WPS), customer requirements, drawings, job sheets or work instructions
1.5Obtain WPS clarification or approval of variation to WPS from appropriate person in accordance with SOPs

2 Prepare welding materials and equipment for FCAW to code standard

2.1Prepare materials to produce weld to code standard
2.2Perform routine maintenance on welding equipment
2.3Set up welding equipment
2.4Select consumables in accordance with WPS

3 Weld joints using FCAW to procedure specifications

3.1Weld materials according to WPS
3.2Apply post-welding heat treatment where specified
3.3Inspect welded joints visually for conformance to specifications
3.4Rectify discontinuities to ensure compliance to code requirements
3.5Maintain weld records in accordance with SOPs

Performance evidence

follow work instructions, standard operating procedures (SOPs) and safe work practices
identify and interpret job specifications and weld parameters from weld procedure specifications (WPS), drawings, sketches and verbal or written job instructions for performing welds using flux core arc welding (FCAW) to code standards on at least two occasions
clean and prepare materials for welding to specifications
set up welding equipment, including performing routine maintenance
produce butt and fillet welds in all positions on different types of materials to meet customer specifications and the requirements of AS 1210 Pressure vessels, AS 4041 Pressure piping, and American Society of Mechanical Engineers (ASME) IX or equivalent on at least two occasions
rectify identified weld discontinuities on at least two occasions
complete and maintain weld records related to FCAW to code standards onto standard workplace forms.
Note: Where a volume and/or frequency is not specified, demonstration must be provided at least once.

Knowledge evidence

safe welding practices and procedures and use of personal protective equipment (PPE)
requirements to produce welds to quality of AS 1210 Pressure vessels, AS 4041 Pressure piping, and ASME IX, or equivalent
AS 1796 Certification of welders and welding supervisors or equivalent national and international standards relevant to FCAW
standards or codes relevant to FCAW to code standards
methods for preparing plate and pipe for code standard welding
pre-welding and post-welding heating methods and requirements for plate and pipe welding to code standard
causes and control of distortion
welding cracks or defects relevant to FCAW to code standards
requirements for maintaining weld records to code standard.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM05079

What does an assessment tool for MEM05079 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM05079 needs to address all 31 unit components: 3 elements with 14 performance criteria, 8 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM05079?

Auditori pulls the current release of MEM05079 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM05079 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM05079 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM05079, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM05079 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM05079 free