MEM05060 — Perform welds to code standards using submerged arc welding process

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM05060 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM05060 must cover

28 assessable components: 3 elements (14 performance criteria), 7 performance evidence and 7 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from weld procedure specifications (WPS) and customer requirements, drawings, job sheets or work instructions
1.5Obtain WPS clarification or approval of variation to WPS from appropriate person in accordance with SOPs

2 Prepare welding materials, consumables and equipment for SAW welding to code standard

2.1Prepare materials to produce weld to code standard
2.2Perform routine maintenance on welding equipment
2.3Set up welding equipment and select weld parameters
2.4Select consumables according to WPS

3 Weld joints using SAW in accordance with weld procedure specification

3.1Weld materials in accordance with welding procedure specification
3.2Apply pre and post-heat where specified
3.3Inspect welded joints visually for conformance to specification
3.4Rectify discontinuities to ensure compliance to code requirements
3.5Maintain weld records in accordance with SOPs

Performance evidence

follow work instructions, standard operating procedures (SOPs) and safe work practices
identify and interpret job specifications and weld parameters from welding procedure specifications (WPS), drawings, sketches and verbal or written job instructions for performing welds using submerged arc welding (SAW) to code standards on at least two occasions
clean and prepare materials for welding to specifications
set up SAW equipment, including performing routine maintenance
weld materials to WPS and specified standards and codes using SAW process on at least two occasions
rectify identified discontinuities on at least two occasions
complete and maintain weld records related to SAW to code standards onto standard workplace forms.

Knowledge evidence

safe welding practices and procedures and use of personal protective equipment (PPE)
AS 1796 Certification of welders and welding supervisors, Certificate 9 or equivalent national and international standards
methods for preparing plate and pipe for code standard
pre and post-heat methods and requirements for plate and pipe SAW to code standard
welding parameters relevant to SAW
welding cracks or defects relevant to SAW
requirements for maintaining weld records to code standard.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM05060

What does an assessment tool for MEM05060 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM05060 needs to address all 28 unit components: 3 elements with 14 performance criteria, 7 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM05060?

Auditori pulls the current release of MEM05060 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM05060 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM05060 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM05060, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM05060 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM05060 free