Auditori
Get started

MEM04035 — Develop and manufacture pipe patterns

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM04035 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM04035 must cover

35 assessable components: 3 elements (14 performance criteria), 10 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications

2 Develop and lay out pipe patterns

  • 2.1Determine type of pipe pattern required through application of moulding and/or casting techniques and foundry processes
  • 2.2Select timber or timber composites to meet specifications
  • 2.3Calculate pattern parameters based on specifications
  • 2.4Lay out pattern to specifications, showing tapers, machining allowances, core prints and method of construction
  • 2.5Develop and manufacture jigs or fixtures that aid pipe pattern manufacture

3 Manufacture pipe patterns

  • 3.1Mark out materials and develop construction to specifications
  • 3.2Produce pattern or pattern component parts to size and shape using wood patternmaking techniques, tools, equipment and procedures
  • 3.3Check pattern or pattern component parts for compliance with specifications
  • 3.4Join and fix pattern component parts to specifications
  • 3.5Colour code, mark or label pattern in accordance with SOPs

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications to develop pipe patterns
  • determining type of pipe pattern required through application of moulding and/or casting techniques and selecting the appropriate timber or timber composites to meet requirements
  • preparing patterns for manufacture using the appropriate mathematical calculations for angles, tapers, clearances and determination of contraction rates
  • laying out pattern to specifications on at least two occasions showing tapers, machining allowances, core prints and method of construction
  • designing and manufacturing required jigs and fixtures
  • marking out and manufacturing pipe wood patterns and pattern component parts on at least two occasions, using appropriate hand and power tools
  • joining and fixing pattern components on at least two occasions and checking compliance with specifications
  • identifying pattern in accordance with SOPs.
  • Note: Where a volume and/or frequency is not specified, demonstration must be provided at least once.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • timber products including features, characteristics and applications
  • moulding and casting techniques
  • tooling required for casting and moulding
  • methoding techniques
  • use and application of jigs and fixtures
  • methods of constructing pipe wood patterns
  • formulae and mathematical techniques required for necessary manufacturing of patterns or core boxes including those related to contraction, taper, clearances and machining allowances
  • identification coding and numbering
  • pattern checking techniques
  • mouldability including surface finish, face taper, convex or concave perspectives and undercuts.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM04035

What does an assessment tool for MEM04035 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM04035 needs to address all 35 unit components: 3 elements with 14 performance criteria, 10 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM04035?

Auditori pulls the current release of MEM04035 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM04035 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM04035 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM04035, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM04035 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM04035 free