MEAAVI0033 — Perform routine removal and installation of miscellaneous aircraft electrical hardware or components
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEAAVI0033 must cover
24 assessable components: 2 elements (9 performance criteria), 6 performance evidence and 6 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to remove aircraft electrical hardware
- 1.1Plan removal task with guidance from qualified person, using maintenance documentation and in accordance with standard enterprise procedures
- 1.2Confirm system safety with qualified person
- 1.3Remove electrical hardware in accordance with standard enterprise procedures and maintenance documentation while observing all relevant work health and safety (WHS) requirements
- 1.4Complete and process required documentation in accordance with standard enterprise procedures
- 1.5Tag, pack or discard removed components in accordance with specified procedures
2 Install aircraft electrical hardware
- 2.1Plan installation with guidance from qualified person, using maintenance documentation and in accordance with standard enterprise procedures
- 2.2Confirm correct part numbers of electrical hardware components to be installed against maintenance documentation
- 2.3Perform physical installation of electrical hardware in accordance with maintenance documentation and standard enterprise procedures
- 2.4Complete and process required maintenance documentation in accordance with standard enterprise procedures
Performance evidence
- remove and install miscellaneous aircraft electrical hardware components under guidance, both on and off-aircraft work during scheduled or unscheduled maintenance, on at least five of the electrical components or hardware that are applicable to the enterprise from the following list: • switches • relays • lamps • terminal blocks • current limiters • circuit breakers • fuses • sockets • potentiometers • capacitors • inductors • magnetic amplifiers • transformers • rheostats • resistors and diodes • miscellaneous sensors and minor components hard mounted throughout the aircraft, busbars, lugs, ferrules, splices, connectors, and electrical, electronic cables and looms
- prepare and terminated electrical cables to aircraft industry standards for the components or hardware being removed and installed, using each of the following techniques: • crimping techniques • soldering techniques • solder sleeve joints
- identify aircraft wire markings, terminal block identification and plug/socket pin numbering systems for the components or hardware being removed and installed
- install electrical loom and harness equipment at least once, ensuring minimum bends are maintained, cable is not in tension, plugs are correctly aligned, security of route ensures no chaffing of insulation, adequate clipping and cable ties have been utilised and construction complies with aircraft industry standards
- positively identify miscellaneous electrical hardware and/or components selected for assessment
- apply cleanliness requirements and safety precautions at all times, and as relevant to the components or hardware being removed and installed and demonstrated awareness of electrostatic discharge procedures
Knowledge evidence
- component attachment methods
- electrostatic discharge procedures
- connection of hardware, plugs and terminals points
- wire marking, terminal block identification and plug/socket numbering systems
- Work health and safety (WHS) practices for removal and installation of miscellaneous aircraft electrical hardware or components
- maintenance documentation for miscellaneous aircraft electrical hardware or components
Foundation skills
- Reading: Reading skills to interpret maintenance manuals.
- Writing: Writing skills to complete maintenance documentation.
- Numeracy: Numeracy skills to interpret technical information.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEAAVI0033
What does an assessment tool for MEAAVI0033 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEAAVI0033 needs to address all 24 unit components: 2 elements with 9 performance criteria, 6 performance evidence requirements, 6 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEAAVI0033?
Auditori pulls the current release of MEAAVI0033 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEAAVI0033 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEAAVI0033 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEAAVI0033, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEAAVI0002 — Remove and install basic aircraft electrical system components
- MEAAVI0004 — Remove and install basic aircraft instrument system components
- MEAAVI0008 — Inspect, test and troubleshoot basic aircraft electrical systems and components
- MEAAVI0009 — Inspect, test and troubleshoot basic aircraft instrument systems and components
- MEAAVI0010 — Inspect, test and troubleshoot advanced aircraft instrument systems and components
- MEAAVI0011 — Inspect, test and troubleshoot basic aircraft communication and radio navigation systems and components
- MEAAVI0012 — Inspect, test and troubleshoot advanced aircraft communications systems and components
- MEAAVI0013 — Inspect, test and troubleshoot instrument landing systems and components
- MEAAVI0014 — Inspect, test and troubleshoot fixed wing autopilot systems and components
- MEAAVI0015 — Inspect, test and troubleshoot rotary wing autopilot systems and components
- MEAAVI0017 — Inspect, test and troubleshoot aircraft primary radar systems and components
- MEAAVI0018 — Inspect, test and troubleshoot aircraft secondary radar systems and components
Your MEAAVI0033 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEAAVI0033 free