MEAAVI0002 — Remove and install basic aircraft electrical system components
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEAAVI0002 must cover
24 assessable components: 2 elements (8 performance criteria), 4 performance evidence and 9 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Remove DC aircraft electrical system components
- 1.1Render system safe and prepare it in accordance with maintenance manual, fitting required isolation tags to ensure personnel safety
- 1.2Remove electrical components in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements
- 1.3Complete and process required maintenance documentation relating to removal in accordance with standard enterprise procedures
- 1.4Tag and pack removed components in accordance with specified procedures
2 Install DC aircraft electrical system components
- 2.1Confirm correct part numbers, modification status, serviceability and shelf life of electrical components to be installed against maintenance manual
- 2.2Perform physical installation including connection of electrical components in accordance with the applicable maintenance manual, and ensure appropriate adjustment or alignment with mechanical interface is carried out
- 2.3Reinstate system to operational condition and prepare for required testing in accordance with maintenance manual
- 2.4Complete and process required maintenance documentation relating to installation in accordance with standard enterprise procedures
Performance evidence
- remove and install basic aircraft electrical system components during scheduled or unscheduled maintenance to meet requirements on at least one component from each of the following: - direct current (DC) generators, and alternator/rectifier generators, and components of related single generator regulation and distribution systems - motors - actuators - piston engine ignition and starting system components - aircraft batteries - specific components of DC electrical systems, such as flaps, landing gear - aircraft lighting - gas turbine engine igniter and starting systems (may be omitted when not applicable to the enterprise).
- complete removal and installation on jobs involving: - electrical components with mechanical interface - installations that require alignment and/or adjustment (mechanical or electrical)
- apply cleanliness requirements and safety precautions at all times, as relevant to the system/s being maintained, and follow work practices associated with electrostatic sensitive devices
- correctly connect DC generators and alternator/rectifier generators for the components being maintained.
Knowledge evidence
- component attachment methods
- connection of hardware and plugs
- work health and safety (WHS) practices for the removal and installation of basic aircraft electrical system components
- approved maintenance documentation and aircraft publications for DC electrical systems
- properties of permanent magnets
- precautions for the care and storage of permanent magnets
- general construction, operating characteristics and applications for: - aircraft DC generators - alternator or rectifier DC generators - DC starter/generators - DC motors, including starter motors - DC rotary and linear actuators - batteries
- how to locate and identify components of: - DC power regulation and distribution systems - piston engine ignition and starting systems - gas turbine engine igniter systems, including specific WHS precautions - gas turbine engine starting systems - DC electrical systems, such as flaps and landing gear retraction - lighting systems
- regulatory requirements and standard procedures relating to the removal and installation of basic aircraft electrical system components.
Foundation skills
- Reading skills: Reading skills to interpret maintenance manuals.
- Writing skills: Writing skills to complete maintenance documentation.
- Numeracy skills: Numeracy skills to interpret technical information.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEAAVI0002
What does an assessment tool for MEAAVI0002 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEAAVI0002 needs to address all 24 unit components: 2 elements with 8 performance criteria, 4 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEAAVI0002?
Auditori pulls the current release of MEAAVI0002 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEAAVI0002 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEAAVI0002 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEAAVI0002, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEAAVI0004 — Remove and install basic aircraft instrument system components
- MEAAVI0008 — Inspect, test and troubleshoot basic aircraft electrical systems and components
- MEAAVI0009 — Inspect, test and troubleshoot basic aircraft instrument systems and components
- MEAAVI0010 — Inspect, test and troubleshoot advanced aircraft instrument systems and components
- MEAAVI0011 — Inspect, test and troubleshoot basic aircraft communication and radio navigation systems and components
- MEAAVI0012 — Inspect, test and troubleshoot advanced aircraft communications systems and components
- MEAAVI0013 — Inspect, test and troubleshoot instrument landing systems and components
- MEAAVI0014 — Inspect, test and troubleshoot fixed wing autopilot systems and components
- MEAAVI0015 — Inspect, test and troubleshoot rotary wing autopilot systems and components
- MEAAVI0017 — Inspect, test and troubleshoot aircraft primary radar systems and components
- MEAAVI0018 — Inspect, test and troubleshoot aircraft secondary radar systems and components
- MEAAVI0030 — Inspect, test and troubleshoot aircraft inertial navigation and reference systems and components
Your MEAAVI0002 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEAAVI0002 free