ICPSCP2730 — Semi-automatically produce basic screen prints

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate ICPSCP2730 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for ICPSCP2730 must cover

42 assessable components: 5 elements (16 performance criteria), 5 performance evidence and 14 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for job

1.1Check substrate against job specifications and report and rectify any irregularities or inconsistencies
1.2Adjust substrate position and stencil registration
1.3Apply ink to screen in quantity required for screen size
1.4Mix colour and ink and check against job specifications

2 Prepare for production run

2.1Run off proof print and check for quality and other technical requirements according to job specifications, and make adjustments as required
2.2Seek approval to commence production from designated personnel
2.3Set up belt speed and energy and adjust printing speeds according to job requirements

3 Run job and monitor print quality

3.1Operate equipment to produce screen print according to job specifications and adjust production speed as required
3.2Evaluate print quality throughout production run and adjust as required
3.3Monitor and adjust curing and drying according to manufacturer specifications
3.4Identify and report problems in machine operation according to enterprise procedures

4 Stack production output

4.1Confirm drying and curing of output prior to stacking
4.2Check job status and progress against job specifications and make adjustments as required

5 Shut down machine

5.1Remove and clean excess ink, screens, squeegees and flood coaters according to work health and safety (WHS) requirements and manufacturer specifications
5.2Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
5.3Clean equipment and surrounding areas according to manufacturer specifications and enterprise procedures

Performance evidence

produce two different one or two colour print runs, using a semi-automatic machine
demonstrate use of control, monitoring and data entry systems
operate production process in association with fellow workers and according to enterprise procedures and planned daily schedule
follow work health and safety (WHS) requirements, manufacturer specifications and enterprise procedures
anticipate production difficulties and take preventive action to prevent occurrence

Knowledge evidence

WHS risks and requirements for: operating a semi-automatic printing machine, cleaning and screen removal, waste disposal
the required substrate, finished size, length of run and order of colours from the job specifications
the required placement of image on the sheet and the significance of substrate guides or lays in preparation for printing
features of the ink selection system
set parameters of belt speed and head units
type of squeegee or flood coater and the squeegee angle used
process of producing a proof print and quality requirements to be checked on the proof, including: colour and strength, registration and clarity, adhesion, gloss level, drying or curing, artwork detail
process of the continuous monitoring of print quality
process of drying and curing of ink before stacking
procedure required for disposing of unused ink and solvent rags
frequency and type of maintenance that should be performed on the printing machine
indications of faults in equipment and enterprise personnel to report to
regulatory requirements governing cleaning and waste disposal procedures
manufacturer manuals, enterprise procedures and work health and safety documentation, including their location and purpose

Foundation skills

Reading: Identifies process from enterprise procedures, manufacturers and suppliers
Numeracy: Uses simple mathematical calculations to determine curing and drying times, required supplies and optimum belt speeds
Self-management: Takes personal responsibility for adherence to regulatory requirements with specific reference to safety Complies with enterprise procedures relevant to own role
Teamwork: Contributes to specific activities requiring joint responsibility and accountability
Planning and organising: Follows clearly defined instructions and sequencing and monitors own progress for the task Takes responsibility for routine low-impact decisions within familiar situations
Problem solving: Responds to predictable problems and implements standard or logical solutions
Technology: Identifies the purpose and specific functions of some common digital tools used in work contexts

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing ICPSCP2730

What does an assessment tool for ICPSCP2730 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICPSCP2730 needs to address all 42 unit components: 5 elements with 16 performance criteria, 5 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICPSCP2730?

Auditori pulls the current release of ICPSCP2730 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICPSCP2730 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICPSCP2730 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICPSCP2730, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your ICPSCP2730 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.