ICPSCP2700 — Manually prepare and produce screen prints

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate ICPSCP2700 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for ICPSCP2700 must cover

53 assessable components: 5 elements (21 performance criteria), 1 performance evidence and 24 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for job

1.1Use material safety data sheets (MSDS) to identify safe chemical handling procedures
1.2Check substrate for conformance to job specifications and report or rectify irregularities
1.3Check ink for conformance to job specifications
1.4Check stencil for conformance to job specifications
1.5Adjust substrate position and stencil registration
1.6Apply ink to screen in quantity required for screen size

2 Prepare for production run

2.1Run off proof print and check for quality and other technical requirements according to job specifications, and make adjustments as required
2.2Seek approval from designated personnel to commence production
2.3Set up belt speed and energy and adjust printing speeds according to job requirements

3 Run job and monitor print quality

3.1Operate equipment to produce screen print according to job specifications and adjust production speed as required
3.2Evaluate print quality throughout production run and adjust as required
3.3Monitor and adjust curing and drying according to manufacturer specifications
3.4Identify and report problems in machine operation according to enterprise procedures

4 Stack production output

4.1Confirm drying and curing of output prior to stacking
4.2Check job status and progress against job specifications and make adjustments as required

5 Conduct shutdown

5.1Transfer material to required destination
5.2Remove and clean excess ink, screens, squeegees and flood coaters according to work health and safety (WHS) requirements and manufacturer specifications
5.3Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
5.4Clean equipment and surrounding areas according to manufacturer specifications and enterprise procedures
5.5Identify, store and maintain tools and equipment according to manufacturer specifications and enterprise procedures
5.6Apply correct procedure for dealing with spilt chemicals according to WHS requirements

Performance evidence

set up screen printing machinery and produce at least two print jobs on different substrates, using fundamental manual screening.

Knowledge evidence

WHS risks and requirements for: setting up and operating screen printing machinery, producing a manual print, operating drying or curing systems, handling and disposing waste, liquids and other materials
material safety data sheets (MSDS) and the information they contain
necessity of checking the substrate for conformance to job specifications
action required if the ink did not comply with job specifications
proof quality and technical requirements, including: colour and strength, registration and clarity, adhesion, gloss level, drying or curing, artwork detail
compliance checks made with the stencil
limitations that arise when setting the substrate position
result if too much ink is applied to the screen
items to check on the printed sheet when the proof print has been run off
factors determining the drying or curing system used for the job
sources of product and machine specifications
result that would occur if the belt speed was too high
reasons why it is required to obtain final approval before commencing the production run
aspects of the print evaluated during printing
reasons for making ink alterations during the run
steps taken with the workplace documentation once the print run is completed
maintenance to carry out on machine and faulty equipment reporting procedure
steps taken to determine whether a print is dried or cured prior to stacking
result of stacking while the ink film is still wet
actions required if problems occur with the job
method for identifying the job's destination when the run has been completed
cleaning procedures for screens, equipment and surrounding areas, and the impact if they are not followed
waste disposal procedures for liquids and other materials, and impact if not followed
manufacturer manuals, enterprise procedures and work health and safety documentation, including their location and purpose.

Foundation skills

Writing: Completes required details accurately using enterprise specific factual information
Numeracy: Identifies numerical information and makes basic calculations to adjust production processes
Self-management: Takes personal responsibility for adherence to regulatory and WHS requirements Complies with enterprise procedures relevant to own role
Teamwork: Contributes to specific activities requiring joint responsibility and accountability
Planning and organising: Follows clearly defined instructions and sequencing and monitors own progress for the task Takes responsibility for routine low-impact decisions within familiar situations
Problem solving: Responds to predictable problems and implements standard or logical solutions
Technology: Identifies the purpose and some specific functions of common digital tools used in work contexts

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing ICPSCP2700

What does an assessment tool for ICPSCP2700 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICPSCP2700 needs to address all 53 unit components: 5 elements with 21 performance criteria, 1 performance evidence requirements, 24 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICPSCP2700?

Auditori pulls the current release of ICPSCP2700 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICPSCP2700 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICPSCP2700 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICPSCP2700, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your ICPSCP2700 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.