CPCCWP3001 — Apply waterproofing system to below ground level wet areas

1 Plan and prepare to apply waterproofing system to below ground level wet areas.

• 1.1Read and interpret work instructions and plan sequence of work.
• 1.2Select and use personal protective equipment (PPE) as required for each stage of the task.
• 1.3Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
• 1.4Follow requirements of job safety analyses and safety data sheets.
• 1.5Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
• 1.6Check for and report substrate and/or surface defects.
• 1.7Select tools and equipment, check for serviceability and report any faults.
• 1.8Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

2 Select waterproofing system.

• 2.1Identify below-ground structure to be waterproofed from drawings and specifications.
• 2.2Select compatible waterproofing systems suitable for site conditions and substrate.

3 Prepare for waterproofing installation.

• 3.1Confirm site access for safety and adequacy for installation.
• 3.2Set out below-ground wet area site, and check alignment and finished levels for conformity with drawings and specifications.
• 3.3Test moisture content in substrate for compatibility with system and report defects.
• 3.4Prepare detailing and terminations and make ready for installation of system.
• 3.5Check that substrate has uniform finish.
• 3.6Clean and prepare substrate ready for waterproofing.

4 Apply waterproofing.

• 4.1Apply waterproofing system to prepared surface to manufacturers’ specifications.
• 4.2Detail and terminate waterproofing membrane in accordance with system requirements.
• 4.3Check completed below-ground waterproofing installation for conformity to manufacturers’ specifications.
• 4.4Document movement joints for subsequent trades.
• 4.5Perform final inspection and completion activities.
• 4.6Protect waterproofing membrane.

5 Apply sealants to construction joints.

• 5.1Select sealant for compatibility with application, substrate and finishes.
• 5.2Install backing rods and/or release agents to prevent three-sided adhesion.
• 5.3Apply sealant manufacturers’ specifications, tool to required finish and allow to cure.
• 5.4Perform final inspection and completion activities.
• 5.5Protect sealant, in accordance with manufacturers’ specifications

6 Clean up.

• 6.1Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
• 6.2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ recommendations.

What does an assessment tool for CPCCWP3001 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCWP3001 needs to address all 89 unit components: 6 elements with 29 performance criteria, 4 performance evidence requirements, 56 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCWP3001?

Auditori pulls the current release of CPCCWP3001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCWP3001 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCWP3001 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCWP3001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.