CPCCST3013 — Carry out cemetery monument fixing

1 Plan the work.

• 1.1Read, interpret and apply monument fixing requirements from current job instructions, specifications and codes.
• 1.2Follow relevant information from workplace procedures, workplace safety and environmental documentation.
• 1.3Determine job priorities and sequence job tasks in consultation with others on site.
• 1.4Identify potential hazards and determine and implement control measures.
• 1.5Use measurements and apply formulas to calculate material quantities.
• 1.6Select and check condition of plant, equipment and tools and report damage or malfunction to relevant personnel.
• 1.7Check conformity of materials against the job requirements and report inconsistencies to relevant person.

2 Construct footings and prepare monument stones.

• 2.1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
• 2.2Set out and excavate trench to specified dimensions.
• 2.3Place reinforcement, fix formwork and pour concrete footings.
• 2.4Set out and install monument on footing.

3 Position side stones.

• 3.1Position side stones, plumb and pack to provide a slight fall towards front stone.
• 3.2Check side stones are aligned, level, parallel and square.
• 3.3Measure, mark, cut and insert abutting dowels.

4 Stand front and back stones.

• 4.1Mix mortar, insert into side stone holes and insert dowel joints to full depth.
• 4.2Position back stone on timber packing in preparation to lift into place and protect side stones to prevent chipping.
• 4.3Place mortar and lift back stone into position and pack level.
• 4.4Locate, raise and position front stone and pack to ensure level and plumb.
• 4.5Mix grout and pack joints between base and kerb stones.
• 4.6Remove excess grout and clean and wash kerb stones.

5 Fix headstone to back stone.

• 5.1Measure and cut dowels for joints, apply mortar or adhesive and insert dowels.
• 5.2Raise and lower headstone into position and finish plumb and level.

6 Fill centre and finish with chip top.

• 6.1Fill and compact centre area base to specified height.
• 6.2Place brick supports in each corner, cut and fix reinforcement and pour a minimum 50 mm concrete slab.
• 6.3Mix and spread stone screening to required finished height.

7 Fit cover stone and finish monument.

• 7.1Measure and cut dowels for joints, prepare and fill centre area and fill dowel holes with mortar and fully insert dowels into position.
• 7.2Shift cover stone into place on timber packing, and lower into place using wedges to finish in position.
• 7.3Prepare and apply pointing/grouting material to finish joints.
• 7.4Remove excess mortar, and clean and polish cover stone.

8 Clean up.

• 8.1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
• 8.2Clean tools and equipment, check for serviceability and report damage or faults.
• 8.3Store and secure tools and equipment following workplace procedures.

What does an assessment tool for CPCCST3013 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCST3013 needs to address all 67 unit components: 8 elements with 32 performance criteria, 3 performance evidence requirements, 32 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCST3013?

Auditori pulls the current release of CPCCST3013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCST3013 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCST3013 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCST3013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.