AVIY0023 — Launch, control and recover a remotely piloted aircraft

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AVIY0023 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AVIY0023 must cover

95 assessable components: 10 elements (41 performance criteria), 33 performance evidence and 21 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Carry out pre-launch procedures

1.1Pre-launch briefing is conducted
1.2Fail-safe checks are undertaken in accordance with relevant operations manual
1.3Air traffic control (ATC) clearances are obtained as required
1.4Approved pre-launch checklists are completed in accordance with relevant operations manual
1.5RPAS is correctly positioned for launch
1.6Airspace is determined as clear for launch

2 Launch RPAS

2.1Launch power is applied and RPAS is maintained, aligned in the launch direction
2.2RPAS is configured for nominated climb profile as required
2.3Situational awareness, lookout and air traffic separation is maintained
2.4Listening watch is maintained in accordance with regulatory requirements
2.5Communication with others as appropriate is undertaken when launching an RPAS
2.6After launch checks are performed in accordance with operational requirements
2.7Situational awareness, lookout and air traffic separation are maintained in all phases of RPAS operation in accordance with regulatory requirements

3 Respond to launch emergencies

3.1Abnormal RPAS operations are identified
3.2Control is maintained to bring RPAS to a safe recovery
3.3Associated emergency procedures are initiated, and checklists and other documentation are completed

4 Climb RPAS

4.1Flight path is observed and risks mitigated in accordance with operational procedures
4.2RPAS climb checks are completed in accordance with operational procedures
4.3Adjustments are made to attitude and power to achieve safe flight

5 Maintain straight and level flight

5.1Power, altitude and configuration are set to achieve straight and level flight as required
5.2Indications of height change are identified and responded to appropriately
5.3Indications of heading change are identified and responded to appropriately
5.4Flight path is observed and risks mitigated in accordance with operational procedures

6 Turn RPAS in flight

6.1RPAS operating limits are maintained during turns in accordance with manufacturer instructions
6.3Potential hazards are identified and controlled during turns

7 Control RPAS speed in flight

7.1Height awareness is maintained during high speed flight
7.2Recovery to cruise speed is achieved while maintaining height during flight

8 Descend RPAS

8.1Adjustments are made to altitude and power to achieve descent rates as required
8.2RPAS is levelled from a descent position at a nominated altitude for operational requirements
8.3Flight path is observed during RPAS descent and risks mitigated in accordance with operational procedures
8.4RPAS operating limits are controlled during descent in accordance with manufacturer instructions
8.5Descent checks are completed in accordance with operational and regulatory requirements

9 Perform RPAS landing procedure

9.1Landings are conducted in accordance with operations manual procedures appropriate to the RPAS type, with allowance for wind velocity
9.2All mandated checklists are completed
9.3Traffic conflict is monitored to ensure safe landing
9.4RPAS is configured for landing in accordance with manufacturer instructions

10 Recover RPAS

10.1RPAS is recovered at a controlled rate of descent
10.2Directional control is maintained at all times
10.3Bouncing of RPAS is minimised appropriately
10.4RPAS is stopped within the available area
10.5Post-recovery checks are performed in accordance with approved checklist, manufacturer instructions and operational requirements

Performance evidence

adapting to differences in equipment and operating environment in accordance with standard operating procedures (SOPs)
applying launch procedures in accordance with flight manual
applying precautions and required action to minimise, control or eliminate identified hazards
applying relevant legislation
applying the techniques of straight and level, climbing and descending flight
carrying out correct procedures in a go-around/position hold
checking and monitoring fail-safe functions
communicating effectively with others when controlling the remote pilot aircraft systems (RPAS) in normal flight, including using a radio
communicating effectively with others when recovering RPAS
complying with air traffic instructions and regulatory requirements
exercising sound judgment when performing recovery procedures
identifying and correctly using relevant equipment
identifying obstructions or other hazards that might hinder a safe launch
implementing contingency plans
implementing work health and safety (WHS) procedures and relevant regulations
interpreting and following operational instructions and prioritising work
interpreting wind speed and direction
maintaining compliance with regulatory requirements
maintaining separation between air traffic
modifying activities depending on workplace contingencies, situations and environments
monitoring and anticipating operational problems and hazards and taking appropriate action
monitoring work activities in terms of planned schedule
monitoring radio as a listening watch
operating electronic communication equipment to required protocol
performing various functions simultaneously as required
reading, interpreting and following relevant regulations, instructions, procedures, information and signs
remaining within a designated area while complying with air traffic requirements
reporting and/or rectifying any identified problems promptly in accordance with regulatory requirements and workplace procedures
responding appropriately to cultural differences
selecting and using required personal protective equipment (PPE) conforming to industry and WHS standards
using instruments and displays to monitor RPAS performance
working collaboratively with others when operating the RPAS
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Knowledge evidence

aeronautical decision-making processes
air traffic requirements
all pre-launch and after-launch checks
effective communication
error management, including error types, causes and consequences
factors affecting directional control of RPAS
fatigue risk management
functions and effects of all RPAS controls
human performance and its limitations, including the senses, memory and situational awareness
in a Defence context, relevant Defence Orders and Instructions
launch emergency procedures
manufacturer specifications for operating a RPAS
obstacle clearance techniques
principles of RPAS aerodynamics
problems that may occur when launching an RPAS and appropriate actions that should be taken in each case
purpose and functions of RPAS
relevant sections of Civil Aviation Safety Regulations (CASRs) and Civil Aviation Orders
relevant WHS and environmental procedures and regulations
required documentation
RPAS launch performance
stress, workload and time pressure management.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AVIY0023

What does an assessment tool for AVIY0023 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AVIY0023 needs to address all 95 unit components: 10 elements with 41 performance criteria, 33 performance evidence requirements, 21 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AVIY0023?

Auditori pulls the current release of AVIY0023 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AVIY0023 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AVIY0023 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AVIY0023, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AVIY0023 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AVIY0023 free