AURTTX013 — Remove and replace clutch assemblies

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURTTX013 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURTTX013 must cover

32 assessable components: 4 elements (16 performance criteria), 1 performance evidence and 6 knowledge evidence requirements, plus 9 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to remove and replace clutch assembly

1.1Safety and environmental requirements are sourced and interpreted
1.2Task instruction is interpreted and clutch assembly to be worked on is identified
1.3Manufacturer specifications and workplace procedures for clutch assembly removal and replacement are sourced and interpreted
1.4Potential hazards and risks associated with task are identified and reported to workplace supervisor
1.5Tools and equipment required for removing and replacing clutch assembly are identified according to manufacturer specifications

2 Remove clutch assembly

2.1Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
2.2Clutch assembly is removed according to workplace procedures and safety and environmental requirements, and without causing damage to components, tools or equipment
2.3Clutch components are identified and inspected according to manufacturer specifications
2.4Clutch assembly component inspection results are recorded

3 Replace clutch assembly

3.1Clutch assembly components are prepared for assembly
3.2Clutch is replaced according to safety and environmental requirements, workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
3.3Clutch assembly finger height is measured and compared to manufacturer specifications

4 Complete work processes

4.1Final inspection is made to ensure work meets task instruction and workplace standards, and clutch assembly is presented ready for use or storage according to workplace procedures
4.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
4.3Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
4.4Workplace documentation is processed according to workplace procedures

Performance evidence

correctly remove and replace a clutch assembly from an operating vehicle with a manual transmission.

Knowledge evidence

key aspects of work health and safety (WHS), occupational health and safety (OHS)and environmental requirements, including: use of personal protective equipment, including safety glasses, ear protection and safety footwear; use of hand tools and lifting equipment; safety data sheets (SDS) and procedures for handling and disposing of waste brake fluid, lubricants and asbestos-based products, including brake dust
clutch assembly types, application and basic operation, including: diaphragm clutch; coil spring clutch
clutch assembly removal procedures
clutch assembly and associated component inspection procedures
clutch assembly replacement procedures, including: clutch aligning; clutch finger height measurement
work area clean-up and maintenance requirements.

Foundation skills

Learning skills: locate appropriate sources of vehicle clutch assembly information and clutch assembly removal and replacement procedures.
Reading skills: select and interpret key information from manufacturer specifications, safety requirements and workplace procedures to safely remove and replace clutch assemblies; select and interpret key information from environmental requirements and workplace procedures to ensure a clean and safe work site.
Writing skills: legibly and accurately fill out workplace documentation using correct industry terminology and conventions.
Oral communication skills: participate effectively in verbal exchanges using questioning and active listening to request, clarify and clearly convey information.
Numeracy skills: read and interpret numerical information in clutch system information; use specialist tools and measuring equipment correctly, including verniers and torque wrenches, and report and record the results correctly using relevant mathematical symbols and conventions (e.g. mm for millimeters); use basic mathematical operations, including addition, subtraction, multiplication and division, to calculate length and clearances.
Planning and organising skills: plan own work requirements and prioritise actions to achieve required outcomes.
Self-management skills: recognise own limitations when selecting and using tools and equipment and seek timely advice.
Problem-solving skills: identify potential or actual hazards and take action to minimise risk; refer problems that cannot be readily resolved and seek assistance from workplace supervisor.
Technology skills: set up and operate equipment and tools required to remove and replace a clutch assembly.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURTTX013

What does an assessment tool for AURTTX013 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURTTX013 needs to address all 32 unit components: 4 elements with 16 performance criteria, 1 performance evidence requirements, 6 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURTTX013?

Auditori pulls the current release of AURTTX013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURTTX013 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURTTX013 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURTTX013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURTTX013 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURTTX013 free