Auditori
Get started

AURETR054 — Diagnose and repair Advanced Driver Assistance Systems (ADAS) and components in vehicles

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURETR054 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURETR054 must cover

39 assessable components: 4 elements (16 performance criteria), 7 performance evidence and 9 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to diagnose and repair ADAS components

  • 1.1Identify job requirements from workplace instructions
  • 1.2Identify required information for diagnosis activity
  • 1.3Analyse diagnostic and testing options to identify cause of fault using workplace and manufacturer procedures
  • 1.4Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.5Identify diagnostic tools and calibration equipment required for ADAS diagnosis and establish serviceability according to workplace procedures

2 Diagnose ADAS component faults

  • 2.1Perform diagnostic scan on ADAS components according to manufacturer and workplace procedures, and workplace health and safety requirements
  • 2.2Identify cause of fault in ADAS through analysis of scan results
  • 2.3Perform system checks to confirm interaction between ADAS and related vehicle control systems
  • 2.4Report cause of fault and recommendations for necessary repairs or replacements according to workplace procedures

3 Carry out repairs to ADAS components

  • 3.1Identify required information, tools, equipment and material for repair activity
  • 3.2Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, and workplace health and safety requirements
  • 3.3Calibrate and program ADAS components to manufacturer specification
  • 3.4Carry out post-repair scan and testing according to manufacturer specification, workplace procedures, and workplace health and safety requirements

4 Complete repair process

  • 4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 4.2Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3Complete documentation according to workplace procedures

Performance evidence

  • diagnose two faults in the ADAS of two different vehicles, where each vehicle is fitted with a different system type, including: - a camera or radar single-sensor system - a camera and radar sensor-fusion system
  • carry out the repair of faults identified from diagnostic tests
  • carry out diagnostic scans to the system
  • locate and identify the ADAS components and system
  • diagnose faults at the both the component and system level
  • calibrate and program the repaired component
  • verify system functionality through post-repair scans

Knowledge evidence

  • manufacturer specifications, Australian Design Rules, technical service bulletins (TSBs), and technical data related to ADAS
  • work health and safety (WHS) requirements relating to ADAS, including procedures for: - using specialised tools and equipment - selecting and using personal protective equipment (PPE) - identifying hazards and controlling risks associated with wearing jewellery while working around electrical systems
  • workplace procedures for: - accessing and inspecting ADAS components - interpreting and using service information
  • operating principles of ADAS components and features, including: - types of ADAS components, including: - forward-facing cameras - Global Positioning System (GPS) - Light Detection and Ranging (LiDAR) sensors - radar sensors - reversing cameras - 360° camera - ultrasonic sensors - types of ADAS features, including: - adaptive cruise control - adaptive headlights - automatic emergency braking (AEB) - blind spot monitoring (BSM) - collision avoidance and warnings - driver monitoring systems (DMS) - emergency lane keeping systems (ELKS) - lane keep assist (LKA) - lane departure warning (LDW) - parking assist systems - rear cross traffic alert - traffic sign recognition (TSR) - how ADAS systems interact with each other and other vehicle control systems, including braking, steering and suspension - communication networks used by ADAS components, including CAN bus, ethernet, local interconnect network (LIN)
  • function of electronic control modules or units (ECUs) in ADAS and how they communicate with sensors and vehicle networks
  • diagnostic requirements for ADAS components, including: - use of scan tools, manufacturer software, and calibration devices in testing ADAS components - accessing secure gateways - interpreting fault codes and diagnostic trouble codes (DTCs), live data and freeze-frame data from ADAS systems - common faults and failure modes of ADAS sensors, cameras, radar, LiDAR, wiring and connectors - impact of environmental and physical conditions on ADAS operation
  • common types of faults, including: - bent brackets - component damage - connector damage - incorrect fitment
  • repair and replacement procedures for ADAS components, including: - removal, installation, alignment and secure mounting of ADAS sensors cameras and radar units - electrical and electronic testing of wiring, connectors and power supplies - software and firmware updates for ADAS components - manufacturer procedures for programming and initialising new ADAS components
  • calibration and post-repair verification of ADAS systems, including: - static and dynamic calibration methods - use of manufacturer-specified calibration targets and equipment - post-repair testing to confirm integration with related vehicle systems - confirming driver assistance functions operate according to manufacturer specifications

Foundation skills

  • Learning: Locates required sources of information Develops a sequenced plan for a specific task
  • Numeracy: Matches electrical components and part identification numbers to workplace instructions, vehicle, machinery and component part lists, and manufacturer specifications Interprets electrical measurements and readings Uses mathematical operations according to Original Equipment Manufacturer (OEM) specifications
  • Oral communication: Uses clear and direct communication to confirm instructions and report diagnostic outcomes
  • Problem solving: Identifies and addresses factors that may impact diagnostic accuracy
  • Reading: Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications Interprets text, symbols and wiring diagrams in information relating to electrical system testing and repair equipment from manufacturer specifications and workplace instructions and procedures
  • Technology: Operates diagnostic scanning tools, calibration equipment, and related software in accordance with manufacturer and workplace instructions
  • Writing: Completes reports, documentation, and workplace forms

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURETR054

What does an assessment tool for AURETR054 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURETR054 needs to address all 39 unit components: 4 elements with 16 performance criteria, 7 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURETR054?

Auditori pulls the current release of AURETR054 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURETR054 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURETR054 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURETR054, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURETR054 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURETR054 free