AURETR001 — Remove and tag automotive electrical system components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURETR001 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURETR001 must cover

23 assessable components: 4 elements (14 performance criteria), 1 performance evidence and 4 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to remove and tag electrical system component

1.1Task instructions are interpreted and electrical system to be worked on is identified
1.2Electrical system component information is accessed and interpreted
1.3Potential hazards and risks associated with task are identified and reported to workplace supervisor
1.4Tools and equipment are selected and checked for serviceability

2 Remove component

2.1Component for removal is identified
2.2Component is removed according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
2.3Removed component is inspected and findings are recorded according to workplace procedures

3 Tag component

3.1Tagging procedures are identified
3.2Removed component is legibly tagged according to workplace procedures and without causing damage to components or systems
3.3Tagged component is stored according to workplace procedures

4 Complete work processes

4.1Final inspection is made to ensure work meets task instruction and workplace standards
4.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3Tools and equipment are checked, stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
4.4Workplace documentation is processed according to workplace procedures

Performance evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills: remove and tag six of the following automotive electrical system components: main fuse panel, battery, starter motor, alternator, ignition system, engine control module, body control module, flasher can relay, brake stop lamp switch, electric fuel pump.

Knowledge evidence

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and tagging automotive electrical system components, including procedures for identifying hazards and controlling risks associated with wearing jewellery while working around high current electrical circuits
environmental requirements, including procedures for disposing of waste materials
types and location of automotive electrical system components, including: main fuse panels, batteries, starter motors, alternators, ignition systems, engine control modules, body control modules, flasher can relays, brake stop lamp switches, electric fuel pumps
procedures for removing and tagging electrical system components, including: component removal, component inspection, component tagging, including key information required on tags, component storage.

Foundation skills

Learning skills: locate appropriate information.
Reading skills: interpret key information from manufacturer and workshop literature relating to electrical system components.
Writing skills: legibly and accurately fill out workplace documentation, including tags, using correct industry terminology and conventions.
Numeracy skills: interpret numerical information in task instructions and part numbers.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURETR001

What does an assessment tool for AURETR001 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURETR001 needs to address all 23 unit components: 4 elements with 14 performance criteria, 1 performance evidence requirements, 4 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURETR001?

Auditori pulls the current release of AURETR001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURETR001 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURETR001 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURETR001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURETR001 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURETR001 free