UEPMNT408 — Install hydro turbines

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Disassemble hydro turbine

• 2.1Isolations for work are confirmed, in accordance with workplace procedures
• 2.2Hydro turbine is disassembled, in accordance with manufacturers’ specifications and workplace procedures
• 2.3Hydro turbine components are removed in priority order, in accordance with manufacturers’ specification and workplace procedures
• 2.4Disassembly is carried out to facilitate reassembly, in accordance with workplace procedures
• 2.5Components are measured and clearances are taken, in accordance with workplace procedures, to determine conformity to manufacturer’s limits and to ensure assembly meets manufacturers’ specifications
• 2.6Measurements and clearances are recorded, in accordance with manufacturer’ specifications and workplace procedures

3 Inspect hydro turbine components

• 3.1Components are cleaned and inspected, in accordance with workplace procedures
• 3.2Faults are identified and recorded, in accordance with workplace procedures
• 3.3New components are inspected for compliance to manufacturers’ specifications, in accordance with workplace procedures
• 3.4Components are prepared for assembly, in accordance with workplace procedures

4 Repair hydro turbine or components

• 4.1Repairs are carried out, in accordance with workplace procedures
• 4.2Repairs are tested and results are analysed to ensure conformance to manufactures’ specifications, in accordance with workplace procedures
• 4.3Data from testing is recorded, in accordance with workplace procedures

5 Reassemble hydro turbine

• 5.1Equipment and plant is prepared for reassembly of hydro turbine, in accordance with workplace procedures.
• 5.2Isolations are confirmed, in accordance with workplace procedures
• 5.3Components are refitted, in accordance with workplace procedures and manufacturers’ specifications.
• 5.4Hydro turbine is assembled, in accordance with workplace procedures and manufacturers’ specifications.
• 5.5Hydro turbine is test run, and operating characteristics are monitored, to ensure compliance with manufacturers’ specifications, in accordance with workplace procedures

6 Complete work

• 6.1Work is completed and appropriate personnel are notified in accordance with workplace procedures
• 6.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 6.3Tools and equipment are maintained and stored, in accordance with workplace procedures
• 6.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT408 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT408 needs to address all 69 unit components: 6 elements with 30 performance criteria, 21 performance evidence requirements, 18 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT408?

Auditori pulls the current release of UEPMNT408 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT408 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT408 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT408, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.