UEPMNT359 — Test and commission instrumentation equipment

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace and site procedures

2 Test wiring systems

• 2.1Isolations for work are confirmed, in accordance with workplace procedures and site requirements
• 2.2Wiring systems are tested, in accordance with workplace procedures, plans, drawings and manuals
• 2.3Wiring systems, including enclosures and supports, are inspected prior to testing, to ensure absence of damage, defect and deterioration, in accordance with workplace procedures
• 2. 4Fixed wiring is tested, as appropriate, in accordance with workplace procedures, and the results are documented to confirm compliance with job specification

3 Test piping and tubing systems

• 3.1Isolations are confirmed, in accordance with workplace procedures and site requirements
• 3.2Piping and tubing systems are tested, in accordance with workplace procedures, plans, drawings and manuals
• 3.3Piping and tubing systems, including enclosures and supports, are inspected prior to testing, in accordance with workplace procedures, to ensure absence of damage, defects or deterioration
• 3.4Fixed piping and tubing is tested, as appropriate, in accordance with workplace procedures, and results are documented to confirm compliance with job specification

4 Test equipment

• 4.1Isolations are confirmed, in accordance with workplace procedures and site requirements
• 4.2Instrumentation equipment is tested, in accordance with workplace procedures, plans, drawings and manuals
• 4.3Test conditions are confirmed and the equipment is inspected, in accordance with workplace procedures, to ensure absence of damage, defects and deterioration
• 4.4Instrumentation equipment is tested using appropriate test techniques, in accordance with workplace procedures
• 4.5Instrumentation equipment test results are documented, in accordance with workplace procedures, to confirm compliance with job specification

5 Commission equipment

• 5.1Isolations are confirmed, in accordance with workplace procedures and site requirements
• 5.2Instrumentation equipment is commissioned, in accordance with workplace procedures, using appropriate plans, drawings and manuals
• 5.3Instrumentation equipment is set up, in accordance with workplace procedures, operational requirements and manufacturers’ specifications
• 5.4Testing and monitoring procedures are followed, in accordance with workplace procedures, and results are monitored and documented to ensure equipment operates within job specification
• 5.5Instrumentation equipment is commissioned, in accordance with workplace procedures
• 5.6Final inspection is carried out, in accordance with workplace procedures

6 Complete work

• 6.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 6.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 6.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 6.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT359 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT359 needs to address all 62 unit components: 6 elements with 31 performance criteria, 16 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT359?

Auditori pulls the current release of UEPMNT359 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT359 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT359 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT359, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.