UEPMNT310 — Maintain material crushers

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with the workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Conduct in-service testing

• 2.1In-service tests are carried out, in accordance with workplace procedures
• 2.2Faults are located, in accordance with workplace procedures, using appropriate tools, equipment and testing techniques
• 2.3Testing and fault finding results are analysed, in accordance with workplace procedures, to establish repairs or ascertain serviceability of material crusher

3 Remove equipment to facilitate maintenance

• 3.1Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements
• 3.2Material crushers are disconnected, in accordance with workplace procedures
• 3.3Material crusher components are removed, in a manner which will assist in replacement, in accordance with workplace procedures
• 3.4Material crusher components are inspected for abnormalities, in accordance with workplace procedures

4 Maintain material crushers

• 4.1Components or subassemblies are dismantled, cleaned and examined to verify tolerances, in accordance with workplace procedures, to determine need to replace, overhaul or repair material crusher
• 4.2Sketches are made, data noted and components are marked for identification for reassembly or overhaul, in accordance with workplace procedures
• 4.3Dimensional inspection is performed, in accordance with workplace procedures, using precision measuring devices to determine compliance with relevant drawings and/or manufacturers’ specification
• 4.4New components are inspected for compliance with manufacturers’ specification and are prepared for assembly, in accordance with workplace procedures
• 4.5Components are weighed, measured and recorded, in accordance with workplace procedures and site requirements
• 4.6Components are reassembled and preliminary balance of equipment is obtained, maintained and adjusted by assembling components sequentially by appropriate weight, in accordance with workplace procedures
• 4.7Plant and machinery is adjusted using appropriate techniques, in accordance with workplace procedures, manufacturers’ specification and site tolerances
• 4.8All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specifications
• 4.9Components are levelled and aligned, using appropriate tools, in accordance with workplace procedures

5 Replace/install material crushers

• 5.1Equipment is prepared for material crushers to be replaced, in accordance with workplace procedures
• 5.2Material crushers are replaced, in accordance with workplace procedures and manufacturers’ specification
• 5.3Alterations or corrections are undertaken, in accordance with workplace procedures
• 5.4Material crushers are levelled, aligned and coupled, in accordance with workplace procedures
• 5.5All fastenings are torqued, in accordance with workplace procedures, manufacturers’ specification and site requirements
• 5.6Material crushers are given a test run and are monitored, as required, in accordance with workplace procedures and manufacturers’ specification

6 Complete work

• 6.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 6.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 6.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 6.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT310 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT310 needs to address all 74 unit components: 6 elements with 34 performance criteria, 20 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT310?

Auditori pulls the current release of UEPMNT310 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT310 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT310 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT310, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.