UEPMNT309 — Maintain material feeders

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Conduct in-service testing

• 2.1In-service tests are carried out, in accordance with workplace procedures
• 2.2Faults are located using appropriate tools, equipment and testing techniques, in accordance with workplace procedures
• 2.3Testing and fault finding results are analysed, in accordance with workplace procedures, to establish repairs required or serviceability of material feeder

3 Remove equipment to facilitate maintenance

• 3.1Isolations are confirmed, where appropriate, in accordance with workplace procedures
• 3.2Material feeders are disconnected, in accordance with the workplace procedures
• 3.3Material feeders are removed, in a manner which will assist in replacement, in accordance with workplace procedures
• 3.4Material feeders are inspected for abnormalities, in accordance with workplace procedures

4 Maintain material feeders

• 4.1Maintenance is performed on material feeder, in accordance with workplace procedures and manufacturers’ specification
• 4.2Components or subassemblies are dismantled, cleaned and examined, in accordance with workplace procedures, to verify tolerances and to determine whether to replace, overhaul or repair
• 4.3Material feeder equipment is dismantled, in a manner that will facilitate reassembly, in accordance with workplace procedures
• 4.4Component parts are clearly marked for identification, in accordance with workplace procedures
• 4.5Components are laid out, in preparation for reassembly, in accordance with workplace procedures and manufacturers’ drawings or specifications
• 4.6New components are inspected for compliance with manufacturers’ specification and are prepared for assembly, in accordance with workplace procedures
• 4.7Modifications or alterations are undertaken, in accordance with workplace procedures
• 4.8Components are reassembled, in accordance with workplace procedures

5 Replace or install material feeders

• 5.1Equipment is prepared for material feeders to be replaced, in accordance with workplace procedures
• 5.2All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specifications
• 5.3Material feeders are given a test run and are monitored, as required, in accordance with workplace procedures and manufacturers’ specification

6 Complete work

• 6.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 6.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 6.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 6.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT309 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT309 needs to address all 60 unit components: 6 elements with 30 performance criteria, 14 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT309?

Auditori pulls the current release of UEPMNT309 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT309 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT309 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT309, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.