UEPMNT308 — Maintain conveyors and associated equipment

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources for work activities are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Remove associated equipment to facilitate maintenance

• 2.1Faulty components and parts of conveyor system are identified and isolations are confirmed, where appropriate, in accordance with workplace procedures
• 2.2Associated equipment of conveyor system is disconnected, in accordance with the workplace procedures
• 2.3Associated equipment of conveyor system is removed, in a manner which will assist in replacement, in accordance with the workplace procedures
• 2.4Conveyors and associated equipment are inspected for abnormalities, in accordance with workplace procedures

3 Maintain conveyors or associated equipment

• 3.1Belt tensioning equipment is released and secured, to facilitate maintenance, in accordance with workplace procedures
• 3.2Sketches are made, data is noted and components are marked for identification or reassembly, in accordance with manufacturers’ specification and workplace procedures
• 3.3Modifications or alterations outside of manufacturers’ specification are approved, in accordance with workplace procedures
• 3.4New components are installed, and inspected for compliance with job specification, and are prepared for reassembly, in accordance with workplace procedures
• 3.5Dimensional inspection is performed, in accordance with workplace procedures, using precision measuring devices to determine compliance
• 3.6Conveyors are levelled, aligned and tensioned, in accordance with workplace procedures and site requirements

4 Replace or install conveyors or associated equipment

• 4.1Faulty components and parts are identified, and site is prepared for conveyors and associated equipment to be replaced, in accordance with workplace procedures
• 4.2Conveyors and associated equipment are replaced, in accordance with workplace procedures and manufacturers’ specification
• 4.3Conveyors and associated equipment are levelled, aligned and coupled, in accordance with workplace procedures
• 4.4All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specifications
• 4.5Conveyors and associated equipment are given a test run, monitored and adjusted, as required, in accordance with workplace procedures and manufacturers’ specifications

5 Complete work

• 5.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 5.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 5.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 5.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT308 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT308 needs to address all 63 unit components: 5 elements with 27 performance criteria, 18 performance evidence requirements, 18 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT308?

Auditori pulls the current release of UEPMNT308 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT308 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT308 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT308, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.