UEPMNT307 — Maintain industrial screens, strainers and filters

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources for work activities are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Remove screens, strainers and filters for maintenance

• 2.1Isolations are confirmed, where appropriate, in accordance with workplace procedures
• 2.2Screens, strainers and filters are disconnected, in accordance with workplace procedures
• 2.3Screens, strainers and filters are removed, in a manner which will assist in replacement, in accordance with workplace procedures
• 2.4Screens, strainers and filters are inspected for abnormalities, in accordance with workplace procedures

3 Maintain screens, strainers and filters

• 3.1Equipment isolation and depressurisation is confirmed visually and manually, as required, in accordance with workplace procedures
• 3.2Plant and/or equipment including screen, strainer and filter components, assemblies and/or subassemblies, are identified and prepared for maintenance, in accordance with workplace procedures
• 3.3Equipment, including screens, strainers and filters are removed, cleaned and marked for identification, in accordance with workplace procedures
• 3.4Faulty items are repaired or overhauled, using appropriate principles, techniques and industry standards, in accordance with the workplace procedures
• 3.5Replacement items for installation are selected and inspected, in accordance with manufacturers’ specification and workplace procedures
• 3.6Modifications or alterations outside of the manufacturers’ specification are approved by appropriate personnel, in accordance with workplace procedures
• 3.7Component failures are identified and probable causes are reported, in accordance with workplace procedures
• 3.8Components or subassemblies are refitted, in accordance with workplace procedures and manufacturers’ specification
• 3.9All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specification

4 Replace screens, strainers and filters

• 4.1Equipment and plant is prepared for screens, strainers and filter replacements, in accordance with workplace procedures
• 4.2Screens, strainers and filters are replaced, in accordance with workplace procedures and manufacturers’ specification
• 4.3Screens, strainers and filters are levelled, aligned and coupled, in accordance with workplace procedures
• 4.4All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specification
• 4.5Equipment and plant including screens, strainers and filters, are given a test run and are monitored and adjusted, as required, in accordance with workplace procedures and manufacturers’ specification

5 Complete work

• 5.1Work is completed and appropriate personnel are notified, in accordance with workplace procedures
• 5.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 5.3Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
• 5.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT307 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT307 needs to address all 59 unit components: 5 elements with 30 performance criteria, 14 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT307?

Auditori pulls the current release of UEPMNT307 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT307 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT307 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT307, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.