UEPMNT304 — Maintain mechanical pumps

1 Plan and prepare for work

• 1.1Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
• 1.2Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
• 1.3Resources are obtained and inspected for compliance with job specification
• 1.4Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
• 1.5Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
• 1.6Work is planned, sequenced and prioritised, in accordance with workplace procedures
• 1.7Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
• 1.8Work area is prepared, in accordance with workplace procedures

2 Remove mechanical pumps for maintenance

• 2.1Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements
• 2.2Mechanical pump is disconnected, in accordance with the workplace procedures
• 2.3Mechanical pump is removed, in a manner which will assist in replacement, in accordance with workplace procedures
• 2.4Mechanical pump is inspected for abnormalities, in accordance with workplace procedures

3 Maintain mechanical pumps

• 3.1Maintenance is performed, in accordance with manufacturers’ specification and workplace procedures
• 3.2Mechanical pump is dismantled, in accordance with manufacturers’ specification and workplace procedures
• 3.3Sketches are made, data is noted and components are marked for identification or reassembly, in accordance with workplace procedures
• 3.4New components are inspected for compliance, in accordance with workplace procedures and manufacturers’ specifications
• 3.5Dimensional inspection is performed, with precision measuring devices, in accordance with workplace procedures, to ensure compliance with manufacturers’ specifications and results are recorded
• 3.6Mechanical pump is reassembled, applying appropriate principles and techniques, in accordance with workplace procedures and manufacturers’ specifications
• 3.7Modifications and/or alterations to mechanical pump are undertaken, in accordance with workplace procedures

4 Replace or install mechanical pumps

• 4.1Equipment is prepared for pump replacement, in accordance with workplace procedures
• 4.2Mechanical pump is replaced, in accordance with workplace procedures and manufacturers’ specification
• 4.3Mechanical pump is levelled, aligned, coupled and connected, in accordance with workplace procedures
• 4.4All fastenings are torqued, in accordance with workplace procedures and manufacturers’ specifications
• 4.5Machinery and/or plant, including mechanical pump, are given a test run, and are monitored and adjusted, as required, in accordance with workplace procedures and manufacturers’ specifications

5 Complete work

• 5.1Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
• 5.2Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
• 5.3Tools and equipment are maintained and stored, in accordance with workplace procedures
• 5.4Work completion details are finalised, in accordance with workplace procedures

What does an assessment tool for UEPMNT304 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEPMNT304 needs to address all 73 unit components: 5 elements with 28 performance criteria, 23 performance evidence requirements, 22 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEPMNT304?

Auditori pulls the current release of UEPMNT304 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEPMNT304 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEPMNT304 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEPMNT304, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.