UEERA0052 — Install, commission, service and maintain low temperature systems

1 Prepare to install low temperature cabinet or freezer room systems

• 1.1WHS/OHS risk control measures and procedures for carrying out the work are obtained and implemented in accordance with workplace procedures
• 1.2Work details are determined from documentation and/or supervisor to establish scope of work to be completed in accordance with workplace procedures
• 1.3Components, piping, accessories, controls and consumables for the installation work are obtained and checked against job requirements in accordance with industry standards and codes of practice
• 1.4Tools, equipment and testing devices to complete work are obtained in accordance with workplace procedures and checked for operational safety in accordance with workplace procedures

2 Install low temperature cabinet or freezer room systems

• 2.1Major components are securely mounted in the locations identified by the documentation or supervisor in accordance with workplace procedures
• 2.2Refrigerant pipe work and associated components are installed according to specifications ensuring all connections and tube cleanliness are in accordance with job requirements and workplace procedures
• 2.3Pressure testing of the installed components and pipe work is conducted to the required level for the type of refrigerant being used in accordance with relevant codes of practice and industry standards
• 2.4Leaks are located and rectified employing appropriate methods in accordance with relevant codes of practice and industry standards
• 2.5Refrigeration system is evacuated to remove moisture and other contaminates in accordance with relevant codes of practice and industry standards
• 2.6Vacuum drop test is carried out to verify all moisture and other contaminants have been removed from the system in accordance with relevant codes of practice and industry standards
• 2.7Power and control circuit wiring is checked to ensure it conforms to circuit diagram specifications and system is electrically safe to energise in accordance with relevant codes of practice and industry standards

3 Commission low temperature cabinet or freezer room systems

• 3.1Refrigeration system is charged with the appropriate type and quantity of refrigerant in accordance with relevant codes of practice, industry standards and manufacturer specifications
• 3.2Operation of the refrigerant metering device is adjusted as necessary to ensure low side superheat in accordance with industry standards, codes of practice and/or workplace documentation or supervisor
• 3.3Safety and cycling controls are adjusted to ensure the operational values are in safe and efficient operation in accordance with codes of practice and/or workplace documentation or supervisor
• 3.4Measurements are obtained and recorded to confirm that the refrigerant charge is optimal and the system is operating within specified parameters in accordance with relevant codes of practice and industry standards

4 Locate and rectify faults and carry out maintenance on low temperature cabinet or freezer room systems

• 4.1Fault diagnosis is carried out in a logical and effective manner in accordance with relevant codes of practice, industry standards and workplace procedures
• 4.2Fault-finding and rectification processes are carried out effectively without damage to the system and components and in accordance with relevant codes of practice, industry standards and workplace procedures
• 4.3System is returned to an operational state in accordance with workplace procedures and manufacturer specifications
• 4.4Components that require routine maintenance are identified and regularly maintained in accordance with relevant timeframes, industry standards and workplace procedures

5 Complete work and report activities

• 5.1WHS/OHS risk control measures continue to be applied in accordance with workplace procedures
• 5.2Worksite and equipment are cleaned and made safe in accordance with workplace procedures
• 5.3Refrigerant usage is recorded in accordance with relevant industry regulations and codes of practice
• 5.4Supervisor is notified of task completion in accordance with workplace procedures

What does an assessment tool for UEERA0052 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERA0052 needs to address all 64 unit components: 5 elements with 23 performance criteria, 7 performance evidence requirements, 34 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERA0052?

Auditori pulls the current release of UEERA0052 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERA0052 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERA0052 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERA0052, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.