UEEIC0048 — Verify compliance and functionality of instrumentation and control installations

1 Prepare to inspect and test instrumentation and control installation

• 1.1WHS/OHS measures for the site are identified, obtained and understood
• 1.2WHS/OHS risk control measures and workplace procedures are followed in preparation for work
• 1.3Safety hazards not previously identified are noted and risk control measures implemented
• 1.4Documentation of installation is reviewed and implemented in accordance with relevant industry standards
• 1.5Relevant person/s is consulted to ensure work is coordinated effectively with others involved on worksite
• 1.6Tools, equipment and testing devices are checked for correct operation and safety in accordance with workplace procedures and relevant industry standards
• 1.7Preparatory work is checked to ensure no damage has occurred and work is in accordance with relevant industry standards

2 Visually inspect instrumentation and control installation

• 2.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
• 2.2Need to visually inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
• 2.3Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
• 2.4Instrument cabling and tubing are checked for suitability of the environments to be installed and protected from damage in accordance with workplace procedures
• 2.5Type, configuration/sizing of instrument cabling and tubing is confirmed for the installation in accordance with relevant industry standards and workplace procedures
• 2.6Control apparatus and installation requirements are cited in accordance with WHS/OHS requirements and relevant industry standards
• 2.7Marking of control apparatus is checked for accuracy and clarity in accordance with relevant industry standards

3 Conduct functional and safety testing

• 3.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
• 3.2Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
• 3.3Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
• 3.4Process control apparatus is operated at low voltage (LV) arrangements to conduct and report on electrical safety tests in accordance with WHS/OHS requirements and workplace procedures
• 3.5Insulation and continuity tests are conducted on process control cabling operating at extra-low voltage (ELV) in accordance with WHS/OHS requirements and workplace procedures
• 3.6Process control tubing/piping is pressure tested in accordance with WHS/OHS requirements and workplace procedures
• 3.7Functional inspections and tests are conducted on process control apparatus in accordance with workplace procedures and relevant industry standards

4 Report instrumentation and control inspection and test findings

• 4.1WHS/OHS risk control work completion measures and workplace procedures are followed
• 4.2Worksite is cleaned and made safe in accordance with workplace procedures
• 4.3Non-compliance defects are identified and reported in accordance with workplace procedures
• 4.4Recommendations for rectifying defects are made in accordance with workplace procedures
• 4.5Verification documentation is completed in accordance with workplace procedures

What does an assessment tool for UEEIC0048 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0048 needs to address all 54 unit components: 4 elements with 26 performance criteria, 15 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEIC0048?

Auditori pulls the current release of UEEIC0048 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0048 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEIC0048 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0048, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.