UEEIC0034 — Set up industrial field control devices
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEEIC0034 must cover
69 assessable components: 3 elements (13 performance criteria), 10 performance evidence and 46 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Identify industrial field control device
- 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures are identified and applied
- 1.2Hazards are identified, risks are assessed, and control measures implemented
- 1.3Industrial field control devices are determined from control system specifications and consultation with relevant person/s
- 1.4Work activities are planned to meet scheduled timelines in consultation with relevant person/s
- 1.5Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Set up industrial field control device
- 2.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
- 2.2Industrial field control devices are set up and operated in accordance with manufacturer instructions
- 2.3Industrial field control devices are positioned and adjusted in accordance with operating principles manufacturer instructions
- 2.4Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- 2.5Industrial field control devices are set up using sustainable energy principles without waste of materials, damaging apparatus, surrounding environments or services in accordance with workplace procedures
3 Test and document set-up of industrial field control device
- 3.1WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
- 3.2Operating anomalies are identified and corrected in accordance with workplace procedures
- 3.3Work completion is documented in accordance with workplace procedures
Performance evidence
- applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including implementing risk control measures
- applying sustainable energy principles and practices
- complying with scheduled timeframes
- dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
- documenting field control device set-up in accordance workplace procedures
- identifying field control devices to be set up
- positioning and adjusting devices in accordance with manufacturer operating instructions and system requirements
- preparing and setting up industrial field control devices
- testing and documenting setting up of industrial field control devices
- testing field devices and making final adjustments to correct anomalies
Knowledge evidence
- industrial processes and the terminology used in measurement, including:
- forms of energy
- general classification of transducers
- measurement technology
- static accuracy
- devices used in optoelectronic systems, including:
- physics of light
- spectral response
- photometry
- light sources and detectors
- lens and mirror theory
- optoelectronic systems and photoelectric switches
- optoelectronic circuits
- the laser
- temperature detection and measurement and their circuit configurations, including:
- introduction to temperature sensing
- bimetallic and filled thermal sensors
- thermocouples, resistance temperature detectors, thermistors, solid state temperature, sensors, integrated circuit temperature sensors and phrometers
- control circuits using temperature detectors
- measurement of pressure, flow and chemical, including:
- diaphragm, bellows and venturi
- strain gauges and load cells
- ultrasonic and magnetic flowmeters
- measurement technology and accuracy
- viscosity, humidity and pH
- linear, angular and rotary motion detection, including:
- linear motion sensors
- angular and rotary motion sensors
- shaft angle encoders
- linear encoders
- tachometers
- accelerometer and vibrometer
- proximity and level detection, including:
- mechanical
- ultrasonics
- microwave
- passive infrared
- nucleonics
- capacitive and inductive proximity
- industrial field control devices set-up, operation, positioning and adjustment
- relevant job safety assessments, including risk control measures
- relevant manufacturer specifications
- relevant WHS/OHS legislated requirements
- relevant workplace documentation
- relevant workplace policies and procedures
- sustainable energy principles and practices
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEEIC0034
What does an assessment tool for UEEIC0034 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEIC0034 needs to address all 69 unit components: 3 elements with 13 performance criteria, 10 performance evidence requirements, 46 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEEIC0034?
Auditori pulls the current release of UEEIC0034 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEIC0034 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEEIC0034 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEIC0034, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEEIC0001 — Analyse complex electronic circuits controlling fluids
- UEEIC0002 — Assemble, enter and verify operating instructions in microprocessor equipped devices
- UEEIC0003 — Assist in commissioning process and instrumentation control systems
- UEEIC0004 — Calibrate, adjust and test measuring instruments
- UEEIC0005 — Configure and maintain industrial control system networks
- UEEIC0006 — Design and configure Human-Machine Interface (HMI) networks
- UEEIC0007 — Design and use advanced programming tools, PC networks and HMI Interfacing
- UEEIC0008 — Design electronic control systems
- UEEIC0009 — Develop an electrical integrated system interface for access through a touch screen
- UEEIC0010 — Develop and test code for microcontroller devices
- UEEIC0011 — Develop electrical integrated systems
- UEEIC0012 — Develop structured programs to control external devices
Your UEEIC0034 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEEIC0034 free