UEEEL0027 — Carry out low voltage electrical field testing and report findings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEEL0027 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEEL0027 must cover

91 assessable components: 3 elements (17 performance criteria), 13 performance evidence and 61 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to carry out electrical field inspection and testing

1.1WHS/OHS requirements and workplace procedures for a given work area are identified, obtained and applied
1.2WHS/OHS risk control measures and workplace procedures in preparation for the work are followed
1.3Scope of work to be undertaken is determined from reports and/or discussions with appropriate person/s
1.4Advice is sought from the work supervisor to ensure work activity is coordinated effectively with others
1.5Tools, equipment and testing devices required to locate faults are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Carry out electrical field inspection and testing

2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
2.2Need to inspect, test and measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures
2.3Circuits/machines/plant are isolated in accordance WHS/OHS requirements and workplace procedures
2.4Safety hazards from fault/s and/or breakdown are documented and risk control measures implemented in consultation with appropriate person/s
2.5Field testing and measuring techniques of electrical systems, circuits, and apparatus are conducted in accordance with workplace procedures
2.6Circuit/apparatus/components are dismantled as required to facilitate testing and parts stored for protection against loss or damage
2.7Tests are determined from report and appropriate testing/measuring instruments selected in accordance with manufacturer instructions and relevant industry standards
2.8Unplanned events are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
2.9Testing activities are carried out without damage to apparatus, circuits, environment or services using sustainable energy practices

3 Complete electrical field testing and report findings

3.1WHS/OHS work completion risk control measures and workplace procedures are followed
3.2Apparatus is reassembled after testing as required and work area is cleaned and made safe in accordance with workplace procedures
3.3Test findings and recommendation for actions are reported in accordance with workplace procedures

Performance evidence

applying relevant industry standards
applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures
applying sustainable energy practices
carrying out inspection and testing, including:
selecting and setting up relevant testing/measuring instruments
using relevant testing techniques
using testing and measuring instruments
completing electrical field inspection, testing and report findings
dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
following workplace procedures and instructions
preparing electrical field testing, including:
identifying work from reports and/or discussion with appropriate person/s
locating tools, equipment and testing devices.

Knowledge evidence

advanced electrical testing and measuring devices, including:
testing/measuring devices and their application
circuit arrangement and safety procedures for connection of testing/measuring devices into a circuit
taking readings
storage, maintenance and care of testing/measuring devices
measurement concepts, including:
notion of error, accuracy and resolution
sources of measurement error and uncertainties
instrument specifications and calibration certificates
test and measuring instrument safety certification levels and their application
types of field measuring instruments and their application, including:
instrument meter movements and readouts, including moving coil, moving iron and dynamometer meter movements, liquid crystal display (LCD) digital and screen readouts
role of a microprocessor/controller in measuring instrument
measuring low voltages (LV) and direct currents (d.c.) and alternating currents (a.c.), including:
LV and current measurement techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set-up and safety procedures
interpreting test readings
measuring high voltages (HV) and d.c. and a.c. including:
HV and current measurement techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set up and safety procedures
interpreting test readings
measuring fault levels and (earth) fault-loop impedance, including:
fault and fault-loop impedance measurement techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set-up and safety procedures
interpreting test readings
measuring power, energy, reactive power, power factor and maximum demand, including:
power measurement techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set-up and safety procedures
interpreting test readings
measuring power quality, including:
power measurement techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set-up and safety procedures
interpreting test readings, including power quality measurement, including waveform distortion, harmonics, power factor and transients
power cable faults and fault detection techniques, including:
poor connection (high resistance)
open circuit
insulation breakdown and arcing
Varley and Murray loop tests
pulse test
echo test
radio-based tests
application and limitations of the various cable fault detection techniques, including:
cable fault detection techniques embodied in microprocessor-based instruments
causes of inaccuracies and overcoming them
test instrument set-up and safety procedures
interpreting test readings
problem-solving techniques
relevant industry standards and codes of practice for electrical inspection and testing
relevant job safety assessments or risk mitigation processes
relevant manufacturer specifications and operating instructions for tools and equipment
relevant quality workplace procedures
relevant sustainable energy practices
relevant tools, equipment, resources and materials
relevant WHS/OHS legislated requirements
relevant workplace documentation
relevant workplace policies, procedures and instructions.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEEL0027

What does an assessment tool for UEEEL0027 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEL0027 needs to address all 91 unit components: 3 elements with 17 performance criteria, 13 performance evidence requirements, 61 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEEL0027?

Auditori pulls the current release of UEEEL0027 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEL0027 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEEL0027 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEL0027, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEEL0027 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEEL0027 free