Auditori
Get started

UEEEL0026 — Align and install traction lift equipment

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEEL0026 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEEL0026 must cover

46 assessable components: 3 elements (18 performance criteria), 7 performance evidence and 21 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to install lift equipment

  • 1.1WHS/OHS requirements and workplace procedures for a given work area are identified and applied
  • 1.2WHS/OHS risk control measures and workplace procedures in preparation for the work are followed
  • 1.3Scope of work to be undertaken is identified from site plans, drawings, specifications and/or discussions with appropriate person/s
  • 1.4Advice is sought from work supervisor to ensure work is coordinated effectively with others
  • 1.5Tools, equipment and alignment devices needed to carry out work are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Align and install lift equipment

  • 2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace safety procedures
  • 2.3Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.4Equipment is installed straight and square in the required locations and within acceptable tolerances
  • 2.5Equipment is aligned and installed in accordance with manufacturer specifications and regulatory requirements
  • 2.6Existing safe work methods for dealing with unplanned situations are discussed with appropriate person/s and documented in accordance with workplace procedures
  • 2.7Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.8Checks of the quality of installed equipment are undertaken in accordance with workplace procedures
  • 2.9Equipment installation is carried out efficiently without unnecessary waste of materials or damage to apparatus, circuits or the surrounding environment using sustainable energy practices

3 Complete and report alignment and installation activities

  • 3.1WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.3Final checks are made to ensure that the installed equipment conforms to job specifications and workplace requirements
  • 3.4'As-installed' equipment is documented and an appropriate person/s notified in accordance with workplace procedures

Performance evidence

  • aligning and installing traction lift equipment
  • applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures and practices, including using of risk control measures
  • applying sustainable energy principles and practices
  • carrying out alignment functions
  • completing and reporting alignment and installation work activities
  • dealing with unplanned events in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • planning to align and install traction lift equipment.

Knowledge evidence

  • alignment equipment, including rail gauges, straight edges, shims/packers and lasers
  • car operating devices, including slowdown switch, limits, inductors, door locks, vanes and shaft information
  • current industry practices, workplace procedures and technologies
  • equipment layout, including specifications, clearances, 3-D impact on layout and lift code
  • fixing devices and methods, including inserts and expansion and chemically bonded anchors
  • installation and alignment of hydraulic equipment, including ram/cylinder, hydraulic lines and bleeding hydraulic system
  • lift car alignment, including superstructure, frames and doors
  • lift well alignment, including guides and brackets, trimmer beams, buffers, compensators, landing doors and locks
  • lift well/s, including lift well alignment
  • multiple lift wells, including: - corrective action and setting of well templates - plumb charts analysis for 3-D impact - use of theodolite, centre line/datum, survey information and layouts
  • single lift wells, including: - purpose and need for accuracy, including identification of clearances - modification of errors, including adjustment and use of template - use of plumb lines and weights
  • measuring and marking out lift wells and machine room, where appropriate
  • plumbing chart and use of laser level
  • machine room alignment, including machine and fixings, diverter, governor and tensioning sheaves, counterweight centre lines and roping system
  • relevant job safety assessments or risk mitigation processes
  • relevant manufacturer specifications and relevant industry standards, including: - traction lift mechanical equipment - traction lift electrical equipment
  • relevant WHS/OHS legislated requirements
  • relevant workplace documentation
  • relevant workplace policies, procedures and instructions
  • running clearances requirements, including safety gear, car sill and door operator
  • sustainable energy principles and practices.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEEL0026

What does an assessment tool for UEEEL0026 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEL0026 needs to address all 46 unit components: 3 elements with 18 performance criteria, 7 performance evidence requirements, 21 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEEL0026?

Auditori pulls the current release of UEEEL0026 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEL0026 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEEL0026 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEL0026, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEEL0026 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEEL0026 free