UEEEC0076 — Verify compliance and functionality of fire protection system installations

1 Prepare to verify fire protection installation

• 1.1WHS/OHS requirements and workplace procedures for a given work area are identified and applied
• 1.2WHS/OHS risk control measures and workplace procedures are followed in preparation for work activities
• 1.3Safety hazards that have not previously been identified are assessed, noted and job safety assessments and risk control measures determined and implemented
• 1.4Appropriate person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite
• 1.5Location of fire protection system components is determined from job specifications and diagrams
• 1.6Inspection and tests are appropriately sequenced in accordance with job schedule and workplace procedures
• 1.7Materials needed for the fire protection system tests and verification are obtained in accordance with workplace procedures and checked against job requirements
• 1.8Tools, equipment and testing devices needed to verify compliance are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Visually inspect fire protection installation

• 2.1WHS/OHS risk control measures and workplace procedures for carrying out verification work activities are followed
• 2.2Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
• 2.3Cabling/wiring is checked for appropriate type and size
• 2.4Cabling/wiring accessories and fire alarm warning components are validated as being suitably located, securely fixed and suitably protected from damage or corrosion
• 2.5Accessories and components are validated as being appropriately rated and meeting functional requirements
• 2.6Fire protection equipment compliance is verified in accordance with safety and functional requirements
• 2.7Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
• 2.8Unplanned situations are dealt with safely and with the approval of relevant person/s
• 2.9Inspection is carried out efficiently without waste of materials or damage to fire protection apparatus, the surrounding environment or services using sustainable energy practices

3 Conduct fire protection compliance tests

• 3.1WHS/OHS risk control measures and workplace procedures for carrying out fire protection testing are followed
• 3.2Back-to-base facilities and system interfaces are isolated in accordance with workplace procedures
• 3.3Testing and measuring of live work and operating system is conducted in accordance with WHS/OHS requirements and within workplace safety procedures
• 3.4Circuits/machines/plant/other system interfaces are checked and isolated to ensure the system is not activated during testing in accordance with WHS/OHS requirements and workplace procedures
• 3.5Electrical inspections and tests are conducted to verify the electrical circuit within the fire installation is safe and functional in accordance with job specifications
• 3.6System tests are conducted to verify that the fire protection equipment and cabling/wiring within the fire protection installation is safe and functions as intended
• 3.7Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
• 3.8Unplanned situations are dealt with safely and with the approval of relevant person/s
• 3.9Testing is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

4 Report inspection and verification findings

• 4.1WHS/OHS work completion risk control measures and workplace procedures are followed
• 4.2Worksite and equipment are cleaned and made safe in accordance with workplace procedures
• 4.3Non-compliance defects are identified and reported in accordance with workplace procedures
• 4.4Recommendations for rectifying defects are made in accordance with workplace procedures
• 4.5Work completion is documented and appropriate person/s notified in accordance with workplace procedures

What does an assessment tool for UEEEC0076 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEEC0076 needs to address all 51 unit components: 4 elements with 31 performance criteria, 10 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEEC0076?

Auditori pulls the current release of UEEEC0076 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEEC0076 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEEC0076 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEEC0076, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.