UEECD0064 — Interpret, produce and modify electrotechnology drawings
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UEECD0064 must cover
64 assessable components: 4 elements (18 performance criteria), 19 performance evidence and 27 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Interpret electrical drawings and diagrams
- 1.1Type of drawings and diagrams is determined from the nature of work to be undertaken
- 1.2Relevant drawings, diagrams, site plans and cable/connection schedules or manuals required for the work to be undertaken are determined and obtained
- 1.3Drawings, diagrams and cable/connection schedules are interpreted using drawing layouts, conventions and symbols
- 1.4Information is extracted from drawings and diagrams for application to the work to be undertaken
- 1.5Technical data of system components is interpreted
2 Produce electrical drawings
- 2.1Drawing conventions are applied in neat and legible freehand drawings to convey information and ideas relevant to the work to be undertaken
- 2.2Correct drawing/diagram type is produced in accordance with job requirements
- 2.3Technical data of system components to determine parameters is included in drawings
- 2.4Drawings are checked for accuracy and compliance with requirements
- 2.5Completed drawings are submitted to relevant person for review
3 Modify electrical drawings
- 3.1Drawing conventions are used to modify drawings in accordance with requirements
- 3.2Technical data of system components is modified in drawings
- 3.3Modified drawings are checked for accuracy and compliance with requirements
- 3.4Modified drawings are submitted to relevant person for review
4 Use computer drawing packages
- 4.1Relevant computer drawing package software is used to produce drawings based on industry standard protocols
- 4.2Relevant computer drawing package software is used to modify drawings based on industry standard protocols
- 4.3Drawings are checked for accuracy and compliance with requirements
- 4.4Completed drawings are stored in accordance with requirements
Performance evidence
- extracting information from drawings and diagrams
- interpreting drawings, diagrams and plans to determine the location of electrical/communication/audio accessories, appliances and cable runs
- using drawings, diagrams, cable/connection schedules, industry standards and codes of practice used in electrotechnology work
- interpreting drawings, diagrams, cable/connection schedules and manuals correctly
- using correct conventions in freehand drawings
- sketching and marking up basic circuit diagrams
- using drawings, diagrams, schedules and manuals to convey information and ideas and obtain job information
- producing the following:
- circuit diagram
- single line diagram
- termination drawing
- loop drawing
- wiring diagram
- block diagram
- marking up an existing printed drawing
- using a computer drawing package to:
- produce a drawing
- modify a drawing
- checking drawings for accuracy and compliance with job specifications
Knowledge evidence
- architectural and building construction drawings and diagrams, including:
- different types of drawings
- relevant information included in drawings and diagrams
- Australian standard symbols
- building types and their construction
- typical cable routes through buildings, structures, and premises
- circuit diagrams, including:
- purpose of circuit diagrams in the electrotechnology industry
- conventions used in and the features of circuit diagrams
- common symbols used in circuit diagrams
- electrical drawings, including:
- types of electrical drawings: block, circuit, wiring and ladder diagrams
- purpose and application of block, circuit, wiring and ladder diagrams
- Australian standard symbols used to represent components on electrical diagrams
- identification of cable type, origin and route from a cable schedule
- developing a cable schedule for a given installation
- wiring diagrams, including:
- purpose of wiring diagrams in the electrotechnology industry
- conventions used in and the features of wiring diagrams
- common symbols used in wiring diagrams.
- computer drawing packages including:
- features and capability
- file management
- symbols
- drawing layout
- commands
- viewing and printing options
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UEECD0064
What does an assessment tool for UEECD0064 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEECD0064 needs to address all 64 unit components: 4 elements with 18 performance criteria, 19 performance evidence requirements, 27 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UEECD0064?
Auditori pulls the current release of UEECD0064 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEECD0064 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UEECD0064 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEECD0064, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UEECD0001 — Analyse materials for suitability in electrical equipment
- UEECD0002 — Analyse static and dynamic parameters of electrical equipment
- UEECD0003 — Apply industry and community standards to engineering activities
- UEECD0004 — Apply material science to solving electrotechnology engineering problems
- UEECD0005 — Apply physics to solving electrotechnology engineering problems
- UEECD0006 — Apply technologies and concepts to energy sector work activities
- UEECD0007 — Apply work health and safety regulations, codes and practices in the workplace
- UEECD0008 — Carry out preparatory energy sector work activities
- UEECD0009 — Carry out routine work activities in an energy sector environment
- UEECD0010 — Compile and produce an energy sector detailed report
- UEECD0011 — Comply with scheduled and preventative maintenance program processes
- UEECD0012 — Contribute to risk management in electrotechnology systems
Your UEECD0064 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UEECD0064 free