UEECD0019 — Fabricate, assemble and dismantle utilities industry components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEECD0019 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEECD0019 must cover

115 assessable components: 3 elements (28 performance criteria), 34 performance evidence and 52 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for dismantling, assembling and fabrication work

1.1Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified and applied in accordance with workplace procedures
1.2WHS/OHS risk control measures and workplace procedures are followed in preparation for the work
1.3Work instructions and relevant workplace procedures, industry standards, codes of practice and regulations for dismantling, assembling and fabrication are identified and applied
1.4Scope of work to be undertaken is obtained from relevant documentation and from work supervisor
1.5Advice is sought from work supervisor to ensure work is coordinated effectively with other persons
1.6Materials required for work are identified and obtained in accordance with workplace procedures
1.7Tools, equipment and measuring devices needed to carry out the work are obtained and checked for correct operation and safety

2 Dismantle and assemble utilities industry apparatus

2.1WHS/OHS risk control measures and workplace procedures for dismantling and assembling apparatus are followed
2.2Circuits/apparatus/plant are checked and isolation confirmed in accordance with WHS/OHS workplace requirements and procedures
2.3Relevant tools are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
2.4Relevant manufacturer guides and instructions are followed when dismantling and assembling apparatus
2.5Apparatus components are marked or tagged correctly during dismantling to ensure correct and efficient reassembly in accordance with workplace procedures
2.6Dismantled components and parts are stored to protect them against loss or damage in accordance with manufacturer instructions and workplace procedures
2.7Apparatus is dismantled and assembled without waste of materials and energy, damage to apparatus, the surrounding environment or services
2.8Unplanned events are referred to supervisor for directions in accordance with workplace procedures
2.9Quality checks are carried out in accordance with workplace procedures
2.10Worksite is tidied, tools and equipment cleaned and securely stored in accordance with workplace procedures
2.11Work supervisor is notified of dismantling and assembling apparatus completion in accordance with workplace procedures

3 Fabricate utilities industry components

3.1WHS/OHS risk control measures and workplace procedures for fabricating components are followed
3.2Circuits/apparatus/plant are checked and isolated in accordance WHS/OHS workplace requirements and procedures
3.3Relevant tools and equipment are selected, used correctly and safely in accordance with manufacturer instructions and workplace procedures
3.4Drawings, diagrams and instructions for fabrication of mechanical components are followed in accordance with workplace procedures
3.5Component dimensions are determined directly by measuring, or by calculation from information supplied in job drawings and instructions
3.6Mechanical components are fabricated by measuring, marking out, cutting, joining and fixing accurately using relevant equipment and tools, minimising waste of materials and energy and/or damage to the surrounding environment or services
3.7Unplanned events are referred to supervisor for directions in accordance with workplace procedures
3.8Quality checks are carried out in accordance with workplace procedures
3.9Worksite is tidied, tools and equipment cleaned and securely stored in accordance with workplace procedures
3.10Work supervisor is notified of fabrication completion in accordance with workplace procedures

Performance evidence

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements
applying sustainable energy work practices to reduce waste when marking out
complying with relevant electrical regulations and legislations
consulting with work supervisor
correctly marking, tagging and storing components during dismantling
dealing with unplanned events in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
drawing freehand mechanical components showing all information needed for its manufacture/fabrication
fabricating, dismantling, assembling utilities industry components, including:
applying safety procedures when using holding and cutting tools
cutting a thread on metallic components
demonstrating safe use of a bench drill
dismantling electrical, electronic, instrumentation or refrigeration/air conditioning piece of equipment using correct procedures
assembling electrical, electronic, instrumentation or refrigeration/air conditioning piece of equipment using correct procedures
drilling metallic and non-metallic components
fabricating components using sheet metal and fabrication tools
following manufacturer guides and instructions
following work instructions
holding and cutting materials accurately
interpreting and completing workplace documentation
interpreting mechanical drawings/diagrams and instructions used in the electrotechnology industry
joining components using correct method and equipment
laying out a drawing of mechanical components using engineering drawing convention
marking out, cut, bend, drill and join sheet metal
measuring, calculating and marking out a project accurately in accordance with workplace procedures
selecting and using portable power tools correctly and safely
selecting and using relevant hand tools correctly and safely
tapping and threading metallic and/or non-metallic components
using vernier calipers and micrometers to measure components
maintaining a clean worksite and equipment
modifying metal enclosures
demonstrating safe drilling practices
modifying plastic enclosures
performing quality checks
planning for dismantling, assembling and fabrication work.

Knowledge evidence

mechanical drawing interpretation and sketching, including:
industry drawing standards of mechanical components
abbreviations and symbols used in drawing of mechanical components
interpretation of mechanical drawings commonly used in the electrotechnology industry (orthogonal projection, third angle - detail and assembly drawings, and pictorial views)
laying out a drawing of mechanical components using engineering drawing convention
freehand drawings of mechanical components showing all information needed for its manufacture/fabrication
workshop planning and materials, including:
methods used to work safely in an industrial work environment
typical non-electrical hazards in the workplace
control measures for dealing with hazards identified
type of metallic and non-metallic materials used in the electrotechnology industry and application of the common materials
planning process
measuring and marking out, including:
reasons for measuring and marking out
sustainable energy work practices related to reducing waste when marking out
holding and cutting materials, including:
procedures for using a range of tools for cutting, shaping, and finishing metallic and non-metallic materials
safety procedures when using holding and cutting tools
drills and drilling, including:
types of drills used in the electrotechnology industry
drilling metallic and non-metallic components
safe use of a bench drill
tapping and threading including type and size of commonly used threads used in electrotechnology work
general hand tools used in electrotechnology work
joining techniques, including:
machine screws
welding, brazing or soldering techniques
portable power tools in electrotechnology work, including:
applications of portable power tools
using portable power tools
fabricating components using power tools
requirements for testing and tagging cord connected electrical equipment
compressed gas operated tools in electrotechnology work
sheet metal work, including:
types of sheet metal materials used in the electrotechnology work
names and applications of the types of fabrication materials
techniques used in fabricating sheet metal, including cutting, bending, drilling/punching, joining and cutting mitres
marking out, cutting, bending, drilling and/or cutting and/or punching holes, joining and cutting mitred joints using sheet metal
sustainable energy work practices to reducing waste when fabricating using sheet metal
low tolerance measurement, including:
tolerance
techniques in using vernier callipers and micrometers
dismantling and assembly techniques, including procedures for ensuring the safe treatment of dismantled components
relevant tools for specific tasks, including:
tapping and threading
general hand tools used in electrotechnology work
joining
portable electric power tools
dismantling and assembly techniques
measuring and marking out
holding and cutting metallic and non-metallic materials
sheet metal work

Foundation skills

Foundation Skills: Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEECD0019

What does an assessment tool for UEECD0019 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEECD0019 needs to address all 115 unit components: 3 elements with 28 performance criteria, 34 performance evidence requirements, 52 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEECD0019?

Auditori pulls the current release of UEECD0019 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEECD0019 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEECD0019 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEECD0019, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEECD0019 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEECD0019 free