TLIB4071 — Install and maintain pole mounted switches and transformers

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIB4071 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIB4071 must cover

51 assessable components: 5 elements (20 performance criteria), 15 performance evidence and 16 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan installation and maintenance

1.1Works order is analysed and confirmed as required by site inspection
1.2Resources required for the job are identified and scheduled in accordance with operational procedures
1.3Hazards are identified, risks are assessed and control measures are implemented
1.4Switch equipment and transformer are transported to worksite
1.5Liaison and communication issues are resolved in accordance with organisational negotiation procedures

2 Prepare the worksite

2.1Work plan and resources required are confirmed/checked at worksite
2.2Personnel participating in the activity, including plant operators and contractors, are fully briefed
2.3Road signs, barriers and warning devices are positioned to ensure a safe worksite
2.4Safeworking practices are observed on or about the running track/line
2.5Worksite is laid out in accordance with work plan to ensure minimum waste and rework
2.6Systems/circuits are isolated as required, proved safe to work on in accordance with works order, and electrical permits are received/accepted/returned as required

3 Install switches and transformers

3.1Switch equipment, transformers and earthing systems are installed and connected
3.2Transformer is tested and voltage output is adjusted
3.3Visual inspection is carried out to confirm equipment/apparatus is in a safe condition to test and/or commission
3.4Commission is carried out in accordance with works order/plan

4 Maintain switches and transformers

4.1Maintenance requirement is confirmed by detailed site diagnosis
4.2Maintenance, including removal, repair, replacement and reinstatement, is carried out in accordance with works order and the condition of equipment

5 Complete work

5.1Worksite is rehabilitated
5.2Appropriate authority is notified on completion of work
5.3Records and documentation for updating system data are completed and processed

Performance evidence

applying appropriate repair/testing practices and procedures
applying relevant workplace procedures
communicating effectively with others
communicating plans, intentions and safety criteria to others
implementing contingency plans
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
monitoring work activities in terms of planned schedule
operating and adapting to differences in equipment in accordance with operating procedures
performing calculations required for installation procedures
reading and interpreting relevant instructions, procedures, information, technical data, manuals and drawings
reporting and/or rectifying identified problems, faults or malfunctions, in accordance with regulatory requirements and workplace procedures
selecting and using test equipment and testing techniques
working collaboratively with others
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

applicable state/territory legislated rail safety requirements, relevant codes of practice, rail industry standards and/or guidelines
characteristics, capabilities and uses of types of pole mounted switches and transformers
distribution system earthing procedures as they relate to installing and maintaining electrical switches and transformer equipment
hazards that may exist when installing and maintaining pole mounted switches and transformers
live/energised line working techniques and equipment
problems that may occur when installing and maintaining pole mounted switches and transformers
relevant electrical/electronic theory and principles
relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
relevant organisation and commercial publications, including construction manuals and technical instructions as they relate to installing and maintaining electrical equipment
relevant recording and documentation procedures
relevant sections of railway safety management plans, rail industry standards and the AS/NZS 3000 Electrical installations (known as the Australian/New Zealand Standard Wiring Rules)
relevant technical regulatory requirements
statutory/organisation traffic control requirements, work zone regulations and guidance signals for planned operations
switching or de-energising procedures and maintenance operations
visual inspection workplace procedures
workplace procedures for installing and maintaining pole mounted switches and transformers

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIB4071

What does an assessment tool for TLIB4071 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIB4071 needs to address all 51 unit components: 5 elements with 20 performance criteria, 15 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIB4071?

Auditori pulls the current release of TLIB4071 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIB4071 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIB4071 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIB4071, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIB4071 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIB4071 free