Auditori
Get started

TLIB3095 — Check and repair points and crossings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIB3095 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIB3095 must cover

48 assessable components: 5 elements (15 performance criteria), 18 performance evidence and 15 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Faults and deficiencies in points and crossings are identified and work required to restore track to required standard is determined
  • 1.2Hazards are identified, risks are assessed and control measures are implemented
  • 1.3Repair methods are appropriately identified to enable repairs to be made
  • 1.4Job requirements are determined in accordance with workplace procedures, and scope of work activities and resources required are identified

2 Maintain components and tolerances

  • 2.1Clearances are adjusted to specifications to ensure correct functioning
  • 2.2Wearing surfaces are cleaned and lubricated as required to minimise wear and ensure correct functioning

3 Install components

  • 3.1New components are prepared to specifications ready for installation
  • 3.2Tools and equipment required for installation are identified and accessed
  • 3.3New and replacement components are installed in accordance with rail industry standards and workplace procedures

4 Conduct post-installation checks

  • 4.1Functional checks are carried out to ensure correct operation
  • 4.2Completed work is checked for compliance to acceptance standards in accordance with workplace procedures
  • 4.3Operating conditions are applied appropriately, in accordance with workplace procedures

5 Complete documentation

  • 5.1Required documentation procedures and processes are confirmed
  • 5.2Documentation is filled in legibly and proofread
  • 5.3Documentation is processed in accordance with workplace procedures

Performance evidence

  • applying relevant workplace procedures
  • cleaning and adjusting components, and/or preparing and installing components
  • completing relevant documentation accurately and to required workplace standards
  • determining work requirements and work methods
  • identifying defects in special track work affecting safe operation
  • identifying faults and appropriate repair methods
  • identifying job hazards and taking required action to minimise, control or eliminate identified hazards
  • identifying/locating defects in points and crossings
  • implementing contingency plans
  • interpreting and following operational instructions and prioritising work
  • modifying activities depending on operational contingencies, risk situations and environments
  • monitoring work activities in terms of planned schedule
  • reading and interpreting relevant instructions, procedures, information, technical data, standards and drawings
  • reporting and/or rectifying identified problems, faults or malfunctions in accordance with regulatory requirements and workplace procedures
  • selecting and applying appropriate lubricants in accordance with safety data sheets (SDS)/material safety data sheets (MSDS) and/or manufacturer instructions and workplace procedures
  • selecting and using appropriate installation and repair techniques and equipment to correct defects in points and crossings
  • using appropriate equipment and methods to make accurate measurements on points and crossings
  • working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

  • component replacement techniques
  • defect tolerances and maintenance techniques
  • defects that can occur in points and crossings
  • documentation and record keeping requirements
  • features and principles of operation of points and crossings
  • hazards that may exist when checking and repairing points and crossings, and ways of controlling the risks involved
  • installation and maintenance requirements for manual points equipment
  • measurement techniques
  • points and crossings rail industry standards
  • problems that may occur when checking and repairing points and crossings, and action that can be taken to report or resolve these problems
  • relevant clearances/tolerances specifications required when checking and repairing points and crossings
  • relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
  • special maintenance requirements for points and crossings
  • types of lubricants and SDS/MSDS and manufacturer instructions
  • workplace procedures for checking and repairing points and crossings

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIB3095

What does an assessment tool for TLIB3095 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIB3095 needs to address all 48 unit components: 5 elements with 15 performance criteria, 18 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIB3095?

Auditori pulls the current release of TLIB3095 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIB3095 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIB3095 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIB3095, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIB3095 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIB3095 free