TLIB0019Inspect, prepare and start an electric tram

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIB0019 must cover

77 assessable components: 5 elements (36 performance criteria), 13 performance evidence and 28 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare electric tram

  • 1.1Planned roster is checked and interpreted for day’s tram driving activities
  • 1.2Allocation of electric trams is checked in conjunction with network control office or planned roster
  • 1.3Electric tram inspection and preparation duties are identified and interpreted
  • 1.4Tram schedules, notices and other operational and regulatory documentation are accessed and interpreted in accordance with workplace procedures
  • 1.5Communications equipment required for the day’s operations is obtained and checked to ensure it is functional
  • 1.6Hazards are identified, risks are assessed and risk control measures are implemented
  • 1.7Required personal protective equipment (PPE) is obtained for use prior to tram driving activities
  • 1.8Electric tram to be inspected and prepared is located in the depot
  • 1.9Depot safety and electrical equipment awareness procedures are followed while locating tram in the depot

2 Visually inspect and prepare electric tram

  • 2.1Features, functions and location of electric tram and associated equipment are identified
  • 2.2Logbook is checked to confirm serviceability of unit
  • 2.3Pre-start internal and external safety and maintenance checks are conducted in accordance with work health and safety (WHS)/occupational health and safety (OHS) and other workplace policies and procedures
  • 2.4Electric tram and equipment are checked visually, and defects and deficiencies are recorded and rectified, isolated, tagged or reported, as required, in accordance with workplace procedures and regulatory requirements
  • 2.5Availability of traction power and sand are checked against journey requirements, as required, in accordance with workplace procedures and regulatory requirements
  • 2.6Relevant WHS/OHS and regulatory requirements are followed
  • 2.7Documentation for electric tram inspection and preparation results is completed in accordance with workplace procedures

3 Conduct on-tram checks

  • 3.1Electric tram is checked in correct sequence and all lights are confirmed as operating to optimum requirements
  • 3.2Pre-departure mechanical checks are performed and correct functioning of all equipment confirmed in accordance with workplace procedures and manufacturer operating requirements
  • 3.3Supervisory controls and indicators are checked to ensure they are functioning correctly and appropriate actions taken if they are not working correctly
  • 3.4Communications equipment is checked to ensure it is functioning correctly and appropriate actions are taken if not working correctly
  • 3.5Seat, windows, blinds and other personal in-cab equipment are checked and adjusted for correct functionality, safety and comfort
  • 3.6Ancillary equipment is checked and is confirmed to be operational in accordance with operating requirements
  • 3.7Fire extinguisher, point bars and any other required tools are checked to confirm they are in position

4 Start electric tram

  • 4.1Electric tram is started in accordance with instructions and any operating faults are recognised, diagnosed, reported and recorded in appropriate records for follow-up
  • 4.2Where critical or serious equipment faults cannot be readily rectified, electric tram is shut down and reported for rectification in accordance with procedures
  • 4.3Instruments and gauges are observed and readings interpreted to confirm effective operation
  • 4.4Actions are taken to determine cause of identified problem in instruments and gauges, and situation is rectified or reported, as required, in accordance with workplace procedures
  • 4.5Sand operation is checked after starting and appropriate actions taken, as required, if not effectively functioning
  • 4.6Pre-departure checks are carried out to ensure electric tram is braking and powering effectively and is safe to move

5 Position electric tram

  • 5.1Authority to move and position electric tram is obtained and relevant personnel are advised of intention and procedures
  • 5.2Electric tram is positioned in accordance with operational requirements and directions
  • 5.3Tram performance is monitored during operation to confirm effective operation or to identify defects
  • 5.4Equipment defects are identified, rectified and recorded or relevant personnel are advised for assistance
  • 5.5Relevant WHS/OHS and regulatory requirements are followed to ensure safety and to prevent injury and damage
  • 5.6Relevant personnel are advised electric tram is secured in required position and is ready for service
  • 5.7Required documentation concerning inspecting, preparing and starting up electric tram is completed and processed in accordance with workplace procedures

Performance evidence

  • adapting to differences in trams and associated equipment and procedures
  • checking and replenishing sand on an electric tram, as required
  • checking electric tram equipment in accordance with workplace procedures
  • conducting pre-operational and in-cab checks in accordance with workplace operational procedures
  • conducting a visual inspection of an electric tram and associated equipment in accordance with workplace procedures
  • identifying and assessing tram defects and deficiencies and taking appropriate actions to report, isolate, repair or replace identified defective equipment in accordance with workplace procedures
  • identifying job hazards and required actions to minimise, control or eliminate identified hazards
  • interpreting and following instructions and prioritising work
  • modifying activities depending on operational contingencies, risk situations and environments
  • monitoring and anticipating operational problems and hazards and taking appropriate actions
  • operating and checking electronic communications equipment to required protocol
  • reading, interpreting and following relevant instructions, information, workplace procedures and signs
  • selecting and using required personal protective equipment (PPE) conforming to work health and safety (WHS)/occupational health and safety (OHS) and industry standards.

Knowledge evidence

  • cleaning requirements for an electric tram
  • communication equipment checks
  • electric tram controls, instruments and indicators and their purpose, location and use
  • external features of an electric tram that must be checked during a pre-operational visual inspection
  • functions of:
  • all supervisory indicators and controls and related checks for correct operation
  • ancillary systems on an electric tram and related checks for correct operation
  • operating controls to start, accelerate, decelerate and stop an electric tram
  • sand as used on an electric tram and the procedures for checking and refilling sand levels and carrying out sand system testing processes on an electric tram
  • monitoring devices, braking and power equipment, safety systems, ancillary systems and any signalling systems
  • principles, purpose and location of controls, monitoring devices, braking, power source and traction systems
  • rail safety, WHS/OHS, and environmental procedures and regulations
  • relevant state/territory road traffic authority and tramway operating procedures
  • requirements for completing relevant documentation when inspecting, preparing and starting an electric tram
  • typical defects that can occur on an electric tram and related actions to be taken
  • workplace procedures for:
  • adjusting controls to optimise the operation of an electric tram
  • braking and safety system procedures for an electric tram
  • emergency response procedures
  • identifying equipment defects and assessing for appropriate actions
  • managing and controlling hazardous situations when preparing and starting up an electric tram
  • minor maintenance including cleaning
  • on-tram pre-operational checks for an electric tram
  • operating electronic communications equipment in accordance with required protocol
  • raising and lowering a pantograph or trolley pole on an electric tram, as fitted
  • starting and operating ancillary systems on an electric tram
  • start-up procedures for an electric tram
  • visual inspection procedures for an electric tram.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIB0019

What does an assessment tool for TLIB0019 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIB0019 needs to address all 77 unit components: 5 elements with 36 performance criteria, 13 performance evidence requirements, 28 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIB0019?

Auditori pulls the current release of TLIB0019 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIB0019 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIB0019 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIB0019, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIB0019 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIB0019 free