RIIMPO313E — Conduct face loader operations

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIIMPO313E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIIMPO313E must cover

66 assessable components: 3 elements (22 performance criteria), 28 performance evidence and 14 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare for face loader operations

1.1Access, interpret and apply face loader operations documentation
1.2Obtain, interpret, clarify and confirm work requirements
1.3Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
1.4Select and wear personal protective equipment required for work activities
1.5Access, interpret and clarify geological and survey data required to complete the work activity
1.6Inspect and prepare work area in coordination with others in line with workplace requirements
1.7Select required face loader equipment and confirm suitability for work activities
1.8Obtain and interpret emergency procedures for face loaders, and be prepared for fires, accidents and emergencies
1.9Coordinate and communicate planned activities with others at the site prior to commencement of work activity

2 Operate face loader in line with established requirements to complete work activity

2.1Carry out prestart and start-up checks in line with workplace procedures
2.2Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
2.3Drive and operate loader using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
2.4Distribute bulk materials into haulage units, maintaining stability and maximum load requirements of the haul unit
2.5Load bulk materials into materials handling equipment
2.6Carry out dumping and stockpiling operations
2.7Connect and tow equipment and plant safely, within equipment and connection capacity
2.8Monitor and manage equipment performance using indicators and alarms
2.9Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
2.10Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures

3 Conduct housekeeping activities

3.1Clear work area and dispose or recycle materials according to workplace procedures
3.2Manage and/or report hazards to maintain a safe working environment
3.3Complete and file or distribute documentation in a manner that complies with workplace practices

Performance evidence

The candidate must demonstrate the ability to complete the tasks outlined in the elements and performance criteria of this unit.
The candidate must demonstrate completion of face loader operations that safely, effectively and efficiently follows workplace procedures to carry out work activity on at least two occasions, and include:
conducting prestart checks prior to commencing operations and shutdown procedures on completion of operations
driving and operating the equipment and adjusting techniques to site conditions
completing a variety of face loader operations including:
bucket loading
load carrying
equipment positioning
load discharge
towing
working safely around
overhead power lines
other machines and personnel
live stockpiles
parking and securing equipment
In the course of the above the candidate must also:
locate and apply relevant documentation, policies and procedures
select and wear personal protective equipment required for work activities
carry out vehicle refuelling requirements and procedures where applicable
apply safe work practices, identifying and reporting all potential hazards, risks and environmental issues
apply problem solving and troubleshooting techniques
select and use the required tools and equipment
inspect and prepare work area
monitor and manage equipment performance using indicators and alarms
identify common equipment faults
use a range of communication techniques and equipment essential to the safe completion of work activity, including hand, audible and other signals
meet written and verbal reporting requirements and procedures associated with equipment operations
organise work activities to meet all task requirements

Knowledge evidence

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements and performance criteria of this unit. This includes:
Key policies and procedures, legislation and established requirements face loader operations, including those relating to:
isolation requirements
fires, accidents and emergencies
work health and safety, including signs of operator fatigue and how it should be managed
operational, maintenance and basic diagnostics
housekeeping activities
personal protective equipment
chain of responsibility for loading and unloading of equipment
recycle materials
Key factors affecting work activities described in performance evidence above, including:
equipment processes, technical capability and limitations
geological and technical data
loading techniques

Foundation skills

Reading: Identifies and interprets information from workplace procedures, documentation, legislation and regulations
Numeracy: Uses equipment operating capacity schedule to confirm safe weight load limits

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIIMPO313E

What does an assessment tool for RIIMPO313E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIIMPO313E needs to address all 66 unit components: 3 elements with 22 performance criteria, 28 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIIMPO313E?

Auditori pulls the current release of RIIMPO313E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIIMPO313E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIIMPO313E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIIMPO313E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIIMPO313E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIIMPO313E free