RIICFW305E — Conduct cast in-situ pilings operations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICFW305E must cover
79 assessable components: 5 elements (20 performance criteria), 9 performance evidence and 48 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to conduct in-situ pilings operation
- 1.1Obtain, interpret and confirm work instructions
- 1.2Access, interpret and apply documentation required to conduct cast in-situ pilings operations and confirm work activity is compliant
- 1.3Obtain and interpret emergency procedures and identify steps required to respond to emergencies
- 1.4Select and wear personal protective equipment according to site requirements
- 1.5Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
- 1.6Identify potential hazards and environmental issues, implement control measures within scope of own role and escalate where required
- 1.7Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8Identify, confirm, and locate materials required for work application
2 Locate and prepare pile positions
- 2.1Establish location for piles from reference points and set out according to job requirements
- 2.2Position and confirm operation of plant and related equipment
- 2.3Bore hole according to job requirements
- 2.4Confirm conformity of caisson according to job requirements
- 2.5Install caisson in bored hole according to job requirements
- 2.6Prepare caisson to receive concrete
3 Place concrete
- 3.1Place concrete into caisson according to job requirements
- 3.2Vibrate concrete, removing voids and air pockets
4 Remove boring rig
- 4.1Relocate boring rig to next installation operation according to job requirements
- 4.2Remove boring rig from site on completion of work according to job and site requirements
5 Conduct clean-up activities
- 5.1Clear work area and dispose of or recycle materials accord to site requirements
- 5.2Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
Performance evidence
- conduct cast in-situ piling operations on at least two occasions, including:
- boring a hole to install at least one caisson, including reinforcement construction and placing concrete into caisson
- setting up, relocating and removing boring rig
- During the above, the candidate must:
- locate and apply required legislation, documentation, policies and procedures
- identify, report and record hazards and risks
- work with others to undertake and complete cast in-situ pilings operations that meets required outcomes, including:
- communicating with others to receive and clarify work instructions
- using communication techniques and equipment, including signage to advise others of work activity and exclusion zones
Knowledge evidence
- legislation required to conduct cast in-situ pilings operations
- policies, procedures and documentation required to conduct cast in-situ pilings operations, including those relating to:
- hazard and risk management
- work health and safety
- emergency response
- site and equipment safety
- environmental protection
- waste management
- communication techniques and equipment
- site isolation and traffic control responsibilities
- operational, maintenance and basic diagnostic procedures
- project quality requirements job plans and specifications
- site requirements
- manufacturer specifications for required plant and equipment
- workplace recording and reporting
- principles and techniques required to conduct cast in-situ pilings operations, including those relating to:
- foundation work
- water erosion
- construction work
- bored cast in-situ piles characteristics and installation
- scaffolding and work platform installation
- installing piles in water
- pile location
- soil types and characteristics, including:
- sand
- rock
- clay
- shale
- gravel
- silt
- vibration methods
- characteristics of reinforced concrete
- concreting
- bore types
- boring rigs
- caisson types and characteristics
- interpreting engineering drawings
- types, characteristics, technical capabilities and limitations of plant and equipment required to conduct cast in-situ pilings operations, including:
- augers
- spirit levels
- plumb bobs
- compressors
- concrete vibrators
- high pressure hoses
- scaffolding
- materials safety data sheet (SDS) compliance processes
- components of job safety analyses (JSAs), job safety environmental analyses (JSEAs), and safe work method statements (SWMs)
- civil construction terminology related to conducting cast in-situ pilings operations
Foundation skills
- Oral communication: Identifies and interprets information from verbal instructions Conveys information and instructions to others verbally
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICFW305E
What does an assessment tool for RIICFW305E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICFW305E needs to address all 79 unit components: 5 elements with 20 performance criteria, 9 performance evidence requirements, 48 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICFW305E?
Auditori pulls the current release of RIICFW305E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICFW305E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICFW305E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICFW305E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICFW301E — Construct underpinning
- RIICFW302E — Install temporary and permanent rock anchors
- RIICFW303E — Install primary ground supports
- RIICFW304E — Conduct pile driving operations
- RIICFW306E — Direct pile driving operations
- RIICFW307E — Direct cast in-situ piling operations
- RIICFW308 — Conduct screw piling operations
Your RIICFW305E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICFW305E free