RIICBS207E — Take samples of road surfacing materials

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIICBS207E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIICBS207E must cover

27 assessable components: 3 elements (13 performance criteria), 6 performance evidence and 6 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to take samples of road surfacing materials

1.1Obtain, interpret and confirm work requirements
1.2Access, interpret and apply documentation required for taking samples of materials used in road surfacing and confirm the work activity is compliant
1.3Identify environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
1.4Select and wear personal protective equipment required for work activities
1.5Confirm and comply with environmental protection, safety and traffic management signage requirements
1.6Select tools and equipment to carry out tasks and check for faults within scope of own role
1.7Obtain and interpret emergency procedures and identify steps required in case of fire, accident and other emergencies

2 Take and manage samples of road surfacing materials

2.1Obtain and use suitable containers for sample collection
2.2Take samples according to job requirements from container, site and stock pile as required
2.3Handle, label and store samples according to job requirements and safe handling procedures

3 Clean up

3.1Clear work area and dispose of and recycle materials as required according to workplace procedures and environmental requirements
3.2Clean, check, perform maintenance on in scope of own role, and store tools and equipment
3.3Carry out housekeeping to workplace requirements

Performance evidence

take samples of materials used in road surfacing on at least two occasions from each of a container, site and stock pile, including: at least one sample of an aggregate material, at least one sample of either asphalt or micro surface.
locate and apply legislation, documentation, policies and procedures required for taking samples of road surfacing materials
work with others to complete the taking of samples of road surfacing materials that meets the required outcomes, including: organising work activities to meet all task requirements, communicating with others to receive and clarify work instructions, using a range of communication techniques and systems, using signage to advise others of work activity and exclusion zone
identify, report and record hazards and risks
clean, check, perform maintenance on and store equipment
complete housekeeping activities.

Knowledge evidence

on site processes and responsibilities relating to site isolation and traffic control
safety data sheet (SDS) compliance processes
key components of job safety analyses (JSAs)/job safety environmental analyses (JSEAs)/safe work method statements (SWMs)
key legislation for taking samples of road surfacing materials
key policies, procedures and established requirements for taking samples of road surfacing materials, including those for: site and equipment safety, work quality, environmental protection, including waste disposal and recycling, handling, labelling and storing samples, housekeeping
key factors affecting work activities described in performance evidence above, including: bituminous materials, equipment types, characteristics and limitations, sampling techniques.

Foundation skills

Reading: Identifies and interprets information from workplace procedures, documentation, legislation and regulations
Oral communication: Uses a range of communication techniques and systems to communicate with others

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIICBS207E

What does an assessment tool for RIICBS207E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICBS207E needs to address all 27 unit components: 3 elements with 13 performance criteria, 6 performance evidence requirements, 6 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICBS207E?

Auditori pulls the current release of RIICBS207E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICBS207E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICBS207E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICBS207E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIICBS207E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIICBS207E free