RIICBM302E — Install pre-cast girders

1. Plan and prepare to install pre-cast girders

• 1.1Obtain, interpret, clarify and confirm work instructions
• 1.2Access, interpret and apply documentation required to install pre-cast girders and confirm work activity is compliant
• 1.3Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
• 1.4Select and wear personal protective equipment according to site requirements
• 1.5Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
• 1.6Identify, address and report environmental issues, potential hazards and risks
• 1.7Select plant, tools and equipment required to carry out tasks and check for faults
• 1.8Identify, confirm, and locate materials required for work application

2. Position and install bearings

• 2.1Determine bearing types and position according to job requirements
• 2.2Confirm quality of bearing dimensions and materials
• 2.3Install bearings according to job and site requirements
• 2.4Identify and install locating brackets and bolts in preparation for placement of girders

3. Install girder

• 3.1Determine individual girder location according to job requirements
• 3.2Determine fitting sequence to install girders and advise crane operator
• 3.3Confirm girders conform to design requirements
• 3.4Check lifting points on girders for serviceability and attach and use tag lines to guide girder to position according to job requirements
• 3.5Place timber packing to support girder load
• 3.6Use drift to align holes and insert and tension locating bolts according to job requirements
• 3.7Adjust bearings such that the full face of the bearing provides support to the girder
• 3.8Brace girder to prevent lateral movement or rolling
• 3.9Remove, roll and store tag lines according to job and site requirements
• 3.10Remove excess epoxy putty according to job and site requirements
• 3.11Remove timber packing at specified time according to job and site requirements

4. Conduct clean up activities

• 4.1Clear work area and dispose of or recycle materials according to site requirements
• 4.2Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements

What does an assessment tool for RIICBM302E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICBM302E needs to address all 86 unit components: 4 elements with 25 performance criteria, 14 performance evidence requirements, 42 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICBM302E?

Auditori pulls the current release of RIICBM302E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICBM302E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICBM302E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICBM302E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.