PMBPROD338E — Repair heavy off-the-road tyres

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMBPROD338E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMBPROD338E must cover

74 assessable components: 6 elements (28 performance criteria), 11 performance evidence and 32 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for job

1.1Move tyre into position in preparation for tyre repair
1.2Secure tyre ready for repair
1.3Determine repair stock and cure time required from injury dimensions
1.4Select required patches and rubber repair stock to meet repair requirements
1.5Select, check and prepare tooling required to perform repair
1.6Acclimate required repair products according to supplier recommendation
1.7Check and wear required personal protective equipment (PPE)

2 Prepare substrates

2.1Prepare surfaces in readiness for repair
2.2Apply adhesive to repair surfaces as required by repair process
2.3Allow surfaces to ‘prime’ in preparation for repair

3 Repair injury

3.1Choose repair materials to meet repair requirements
3.2Check compatibility of materials with repair type
3.3Check maximum pre-heating temperatures for materials being used
3.4Repair tyre components as required according to workplace procedures
3.5Fill tyre injury according to workplace procedures

4 Patch injury

4.1Review patch size to ensure adequate coverage for job
4.2Remove inner liner in preparation for patching
4.3Prepare surfaces in preparation for patching
4.4Correctly prepare patch for application
4.5Install patch according to workplace procedures
4.6Follow pressurisation or curing instructions for patching of injury

5 Complete repair

5.1Prepare injury for curing
5.2Accurately complete required paperwork
5.3Complete housekeeping and apply waste management strategies according to workplace procedures

6 Anticipate and solve process control variances

6.1Recognise existing or potential process control variances and their causes
6.2Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
6.3Monitor process control variances and corrective actions taken until resolved
6.4Accurately maintain records and logbooks

Performance evidence

repair heavy off-the-road tyres, including:
at least two of the following types of repair:
cuts, abrasion, splits, cracks and crazing
separations within the structure
internal or surface deformities
penetrations into and through the casing/carcass
at least two of the following repair locations:
tread or crown including steel components
shoulder or sidewall
bead area
liner.

Knowledge evidence

the functions and operating principles of heavy off-the-road tyre repair equipment
heavy off-the-road tyre construction
radial and bias ply construction
common injuries to heavy off-the-road tyres and their indicators
common hidden injuries and their indicators, including:
cuts
oxidation
separations
methods for repairing injuries to tyres, including:
cuts, abrasion, splits, cracks and crazing
separations within the structure
deformities both surface and internal
penetrations into and through the casing/carcass
methods for repairing injuries to tyres in:
tread or crown, including steel components
shoulder
sidewall
bead area
liner
types of injuries that do not need repairing, injuries that are reparable and injuries that either individually or in the sum should not be repaired
methods of identifying lug/position identification
production workflow sequences
types of patching materials and their characteristics
typical quality standards required at each stage of the process
impact of significantly faulty tyres falsely passing inspection
key variables that may affect product quality and production output
typical and atypical process and product problems, including early warning signs, possible causes and corrective actions
organisational procedures relevant to the work environment or job role
hazards that may arise in the job or work environment, and:
their possible causes
potential consequences
appropriate risk controls.

Foundation skills

Numeracy: to interpret technical information.
Reading: to interpret specifications and workplace procedures.
Writing and oral communication: to record and report on tyre repair operations.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMBPROD338E

What does an assessment tool for PMBPROD338E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMBPROD338E needs to address all 74 unit components: 6 elements with 28 performance criteria, 11 performance evidence requirements, 32 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMBPROD338E?

Auditori pulls the current release of PMBPROD338E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMBPROD338E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMBPROD338E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMBPROD338E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMBPROD338E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMBPROD338E free